Filters
All Products
-
Zero4U - 4-Port USB Hub without Pogo Pins (v1.3) (ID:4115)
Adafruit£10.00 inc VAT
£8.33 ex VATDESCRIPTION One can never have enough socks or USB ports. Add some more USB capability to your Raspberry Pi Zero, or any other single-board compute...
View full details£10.00 inc VAT
£8.33 ex VATSale -
DS3502 I2C Digital 10K Potentiometer Breakout - STEMMA QT / Qwiic
Adafruit£7.00 inc VAT
£5.83 ex VATDESCRIPTION Talking over an I2C bus, your Arduino, CircuitPython board, or Python powered computer can talk to the DS3502 and tell it to vary its ...
View full details£7.00 inc VAT
£5.83 ex VATSale -
USB to TTL Serial Cable - Debug/Console Cable for Raspberry Pi
Cool ComponentsOriginal Price £10.50 inc VATCurrent Price £8.17 inc VAT
£6.81 ex VATDESCRIPTION This 80cm cable is the easiest way ever to connect to your Raspberry Pi or microcontroller. Inside the USB plug is a USB to Serial conv...
View full detailsOriginal Price £10.50 inc VATCurrent Price £8.17 inc VAT
£6.81 ex VATSave 22% -
Pre-loaded NOOBS 16GB MicroSD Card for Raspberry Pi 2 and 3 model B
Cool Components£12.01 inc VAT
£10.01 ex VATDESCRIPTION This is a 16GB class 10 microSD card that comes with a pre-installed with NOOBS operating system and an adapter for an SD card slot. Th...
View full details£12.01 inc VAT
£10.01 ex VATSale -
Raspberry Pi 3 GPIO Shrouded Header (2x20) (PRT-13054)
SparkFun£0.62 inc VAT
£0.52 ex VATDESCRIPTION This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 3 so you can easily connect via ribbon cable to ...
View full details£0.62 inc VAT
£0.52 ex VATSale -
DRV2605L Linear Actuator Haptic Breakout
PimoroniOriginal Price £13.99 inc VATCurrent Price £11.05 inc VAT
£9.21 ex VATDESCRIPTION This DRV2605L haptic driver breakout with a linear actuator will really get you buzzing! The powerful haptic buzz is programmable with...
View full detailsOriginal Price £13.99 inc VATCurrent Price £11.05 inc VAT
£9.21 ex VATSave 21% -
Teensy Arduino Shield Adapter (KIT-15716)
SparkFunOriginal Price £12.74 inc VATCurrent Price £9.91 inc VAT
£8.26 ex VATDESCRIPTION The Teensy is an amazing and compact development platform in a breadboard friendly form factor, but what if you could incorporate it in...
View full detailsOriginal Price £12.74 inc VATCurrent Price £9.91 inc VAT
£8.26 ex VATSave 22% -
Flat Ribbon Cable for Raspberry Pi Camera and Display - 15cm
Cool Components£0.99 inc VAT
£0.83 ex VATDESCRIPTION This 15cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).
£0.99 inc VAT
£0.83 ex VATSold out -
Qwiic Joystick (COM-15168)
SparkFunOriginal Price £12.40 inc VATCurrent Price £9.65 inc VAT
£8.04 ex VATDESCRIPTION Now, you can easily add an HID/controller to your project! The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection...
View full detailsOriginal Price £12.40 inc VATCurrent Price £9.65 inc VAT
£8.04 ex VATSave 22% -
Grove - Qwiic Hub - Compatible with Grove/Qwiic/STEMMA QT Modules & Controllers
Seeed Studio£3.59 inc VAT
£2.99 ex VATDESCRIPTION Different from the Grove system the Qwiic connection system is an I2C interface system createdby Sparkfun. It uses a 4pin JST SH 1.0mm ...
View full details£3.59 inc VAT
£2.99 ex VATSold out -
Qwiic Twist - RGB Rotary Encoder Breakout (DEV-15083)
SparkFun£22.42 inc VAT
£18.68 ex VATDESCRIPTION The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to the Qwiic Connect System. The Twist t...
View full details£22.42 inc VAT
£18.68 ex VATSale -
Pinbetween
PimoroniOriginal Price £7.19 inc VATCurrent Price £5.66 inc VAT
£4.72 ex VATDESCRIPTION Pinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on, and it's completely sold...
View full detailsOriginal Price £7.19 inc VATCurrent Price £5.66 inc VAT
£4.72 ex VATSave 21% -
Arduino MKR Grove Connector Carrier
ArduinoOriginal Price £19.99 inc VATCurrent Price £15.94 inc VAT
£13.28 ex VATDESCRIPTION Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNEC...
View full detailsOriginal Price £19.99 inc VATCurrent Price £15.94 inc VAT
£13.28 ex VATSave 20% -
NTSC/PAL (Television) TFT Display - 1.5" Diagonal
Generic / OEMOriginal Price £39.59 inc VATCurrent Price £32.78 inc VAT
£27.32 ex VATDESCRIPTION Yes, this is a miniature television! The visible display measures only 1.5" diagonal, the TFT comes with an NTSC/PAL driver board. The ...
View full detailsOriginal Price £39.59 inc VATCurrent Price £32.78 inc VAT
£27.32 ex VATSave 17% -
Qwiic 12 Bit ADC - 4 Channel (ADS1015) (DEV-15334)
SparkFun£12.40 inc VAT
£10.33 ex VATDESCRIPTION A lot of the time you just need to add more analogue inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide f...
View full details£12.40 inc VAT
£10.33 ex VATSale -
Grove - RS232
Seeed Studio£8.99 inc VAT
£7.49 ex VATDESCRIPTION Most of the MCUs use TTL levels, and the computer serial port generally uses 232 levels. If we want the computer to communicate with th...
View full details£8.99 inc VAT
£7.49 ex VATSold out -
Official Raspberry Pi TV HAT
Raspberry Pi£19.99 inc VAT
£16.66 ex VATDESCRIPTION The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems, including DVB-T and DVB-T2, on a Raspberry Pi. ...
View full details£19.99 inc VAT
£16.66 ex VATSold out -
Arduino MKR ETH Shield
AdafruitOriginal Price £25.99 inc VATCurrent Price £21.28 inc VAT
£17.73 ex VATDESCRIPTION Are you developing a project for an environment where wireless connections are unavailable or would be inefficient? The MKR ETH shield...
View full detailsOriginal Price £25.99 inc VATCurrent Price £21.28 inc VAT
£17.73 ex VATSave 18% -
Qwiic pHAT Extension for Raspberry Pi 400 (DEV-17512)
SparkFunOriginal Price £6.00 inc VATCurrent Price £4.67 inc VAT
£3.89 ex VATDESCRIPTION The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO,...
View full detailsOriginal Price £6.00 inc VATCurrent Price £4.67 inc VAT
£3.89 ex VATSave 22% -
SparkFun Arduino ProtoShield - Bare PCB (DEV-13819)
SparkFunOriginal Price £4.68 inc VATCurrent Price £3.65 inc VAT
£3.04 ex VATDESCRIPTION The SparkFun Arduino ProtoShield is a bare PCB with no attached or included parts that let you customise your own Arduino shield using ...
View full detailsOriginal Price £4.68 inc VATCurrent Price £3.65 inc VAT
£3.04 ex VATSave 22% -
Teensy Prop Shield - LC - Low Cost (no Motion Sensors)
Generic / OEMOriginal Price £9.48 inc VATCurrent Price £6.47 inc VAT
£5.39 ex VATDESCRIPTION This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes. Audio Amplifier-...
View full detailsOriginal Price £9.48 inc VATCurrent Price £6.47 inc VAT
£5.39 ex VATSave 32% -
Terminal Block Breakout for BBC micro:bit
KitronikOriginal Price £9.77 inc VATCurrent Price £6.54 inc VAT
£5.45 ex VATDESCRIPTION The Terminal Breakout board for the BBC micro:bit does exactly what it says on the tin. It breaks out all of the signal and power pins ...
View full detailsOriginal Price £9.77 inc VATCurrent Price £6.54 inc VAT
£5.45 ex VATSave 33% -
Arduino MKR CAN Shield
Arduino£26.62 inc VAT
£22.18 ex VATDESCRIPTION With this shield, you can easily connect to a CAN (Controller Area Network) Bus. Discover new possibilities of interaction between your...
View full details£26.62 inc VAT
£22.18 ex VATSale -
Arduino MKR Mem Shield
Arduino£15.94 inc VAT
£13.28 ex VATDESCRIPTION The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2 megabytes of flash memory. It also includ...
View full details£15.94 inc VAT
£13.28 ex VATSale -
LED Shield - Compatible with Arduino Uno
Cool ComponentsOriginal Price £18.99 inc VATCurrent Price £13.96 inc VAT
£11.63 ex VATDESCRIPTION This shield is designed to make using NeoPixel and DotStar LED strips and rings as easy as possible with controllers that use the Ardui...
View full detailsOriginal Price £18.99 inc VATCurrent Price £13.96 inc VAT
£11.63 ex VATSave 26% -
MCP9600 Thermocouple Amplifier Breakout
Pimoroni£20.99 inc VAT
£17.49 ex VATDESCRIPTION This top-of-the-range MCP9600 thermocouple amplifier breakout works with eight different thermocouple types, has built-in temperature ...
View full details£20.99 inc VAT
£17.49 ex VATSold out -
Downgrade GPIO Ribbon Cable for Raspberry Pi A+/B+/Pi 2/Pi 3 40p to 26p
Generic / OEM£2.98 inc VAT
£2.48 ex VATDESCRIPTION Drops onto your Raspberry Pi B+ 40-pin header and allows you to connect to things that are sized for the Raspberry Pi's 26-pin header. ...
View full details£2.98 inc VAT
£2.48 ex VATSale -
UPDI Friend - USB Serial UPDI Programmer (ID:5879)
Adafruit£7.99 inc VAT
£6.66 ex VATDESCRIPTION UPDI stands for Unified Program and Debug Interface, but this board is so smol and cute that we will call it the Unusually Playful Devi...
View full details£7.99 inc VAT
£6.66 ex VATSale -
PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9546A Compatible
Adafruit£4.99 inc VAT
£4.16 ex VATDESCRIPTION You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three...
View full details£4.99 inc VAT
£4.16 ex VATSale -
Adafruit CRICKIT for micro:bit (ID: 3928)
AdafruitOriginal Price £34.99 inc VATCurrent Price £24.58 inc VAT
£20.48 ex VATDESCRIPTION Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in ...
View full detailsOriginal Price £34.99 inc VATCurrent Price £24.58 inc VAT
£20.48 ex VATSave 30% -
PCA9546 4-Channel I2C Multiplexer - TCA9546A Compatible
Adafruit£4.99 inc VAT
£4.16 ex VATDESCRIPTION You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, th...
View full details£4.99 inc VAT
£4.16 ex VATSale -
Teensy LED Controller
Cool ComponentsOriginal Price £15.99 inc VATCurrent Price £12.17 inc VAT
£10.14 ex VATDESCRIPTION This control board is designed to make using NeoPixel and DotStar LED strips and rings as easy as possible with a Teensy microcontrolle...
View full detailsOriginal Price £15.99 inc VATCurrent Price £12.17 inc VAT
£10.14 ex VATSave 24% -
What The Flex
PimoroniOriginal Price £5.99 inc VATCurrent Price £4.67 inc VAT
£3.89 ex VATDESCRIPTION Developing with flat flex cables? What The Flex will help you break out the cable to a friendly 2.54mm header. Use up to 30-way connect...
View full detailsOriginal Price £5.99 inc VATCurrent Price £4.67 inc VAT
£3.89 ex VATSave 22% -
HDMI to DVI Adapter Cable
Generic / OEMOriginal Price £6.40 inc VATCurrent Price £4.27 inc VAT
£3.56 ex VATDESCRIPTION This HDMI to DVI converter cable is perfect if you need to use your Raspberry Pi with an older style monitor that has neither HDMI nor ...
View full detailsOriginal Price £6.40 inc VATCurrent Price £4.27 inc VAT
£3.56 ex VATSave 33% -
SPI FLASH Breakout W25Q128 - 128 MBit / 16 MByte
Adafruit£6.99 inc VAT
£5.83 ex VATDESCRIPTION Sometimes you need a little extra storage for your microcontroller projects: for files, images, fonts, audio clips, etc. Sometimes you ...
View full details£6.99 inc VAT
£5.83 ex VATSale -
Arduino MKR 485 Shield
ArduinoOriginal Price £31.99 inc VATCurrent Price £26.62 inc VAT
£22.18 ex VATDESCRIPTION Thanks to this shield, you can now connect your MKR board to any of the industrial systems that use the RS 485 protocol. The MKR 485 sh...
View full detailsOriginal Price £31.99 inc VATCurrent Price £26.62 inc VAT
£22.18 ex VATSave 17%