Filters
All Products
-
Seeeduino XIAO Expansion board
Seeed Studio£16.04 inc VAT
£13.37 ex VATDESCRIPTION A powerful expansion board for Seeeduino XIAO. It enables you with a quick and easy way for prototyping or complete your next big proje...
View full details£16.04 inc VAT
£13.37 ex VATSold out -
ZIF Socket 28-Pin 0.3 inch
Generic / OEM£2.83 inc VAT
£2.36 ex VATDESCRIPTION This is a high-quality, easy to use 28-pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high...
View full details£2.83 inc VAT
£2.36 ex VATSold out -
sensor:bit for BBC micro:bit
ElecFreaksOriginal Price £5.99 inc VATCurrent Price £3.90 inc VAT
£3.25 ex VATDESCRIPTION The Sensor:bit is a breakout board for the BBC micro:bit. It has extended all available IO ports on the micro:bit, and lead them out i...
View full detailsOriginal Price £5.99 inc VATCurrent Price £3.90 inc VAT
£3.25 ex VATSave 35% -
DeadOn RTC - DS3234 Breakout (BOB-10160)
SparkFun£22.72 inc VAT
£18.93 ex VATDESCRIPTION Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock ...
View full details£22.72 inc VAT
£18.93 ex VATSale -
MCP2221A Breakout - General Purpose USB to GPIO ADC I2C (Stemma QT / Qwiic)
Adafruit£7.00 inc VAT
£5.83 ex VATDESCRIPTION Wouldn't it be cool to drive a tiny OLED display, read a colour sensor, or even just flash some LEDs directly from your computer? Sure...
View full details£7.00 inc VAT
£5.83 ex VATSale -
GPS Breakout - XA1110 (Qwiic) (GPS-14414)
SparkFunOriginal Price £54.79 inc VATCurrent Price £42.62 inc VAT
£35.52 ex VATDESCRIPTION The XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to the Qwiic Connect System. Equipped with the XA...
View full detailsOriginal Price £54.79 inc VATCurrent Price £42.62 inc VAT
£35.52 ex VATSave 22% -
SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte (ID: 1897)
Adafruit£6.55 inc VAT
£5.46 ex VATDESCRIPTION FRAM, or Ferroelectric Ram, is the coolest new data storage method that all fashion magazines are talking about. Oh, wait, no that's qu...
View full details£6.55 inc VAT
£5.46 ex VATSale -
LED Driver Breakout - LP55231 (BOB-13884)
SparkFun£9.29 inc VAT
£7.74 ex VATDESCRIPTION The LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarka...
View full details£9.29 inc VAT
£7.74 ex VATSale -
Button Pad 4x4 - Breakout PCB (COM-08033)
SparkFun£7.91 inc VAT
£6.59 ex VATDESCRIPTION This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are sold...
View full details£7.91 inc VAT
£6.59 ex VATSale -
SparkFun Real Time Clock Module - RV-1805 (Qwiic) (BOB-14558)
SparkFun£17.28 inc VAT
£14.40 ex VATDESCRIPTON Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The R...
View full details£17.28 inc VAT
£14.40 ex VATSale -
GPIO Adapter for Raspberry Pi 400
Monk MakesOriginal Price £5.93 inc VATCurrent Price £4.07 inc VAT
£3.39 ex VATDESCRIPTION The Monk Makes GPIO Adaptor for Pi 400 makes it easy to use existing Raspberry Pi accessories with the new Raspberry Pi 400. It also ma...
View full detailsOriginal Price £5.93 inc VATCurrent Price £4.07 inc VAT
£3.39 ex VATSave 31% -
Si4703 FM Tuner Basic Breakout (BOB-11083)
SparkFun£12.32 inc VAT
£10.27 ex VATDESCRIPTION This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If y...
View full details£12.32 inc VAT
£10.27 ex VATSale -
1.12" Mono OLED (128x128, white/black) Breakout
Pimoroni£15.89 inc VAT
£13.24 ex VATDESCRIPTION A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 p...
View full details£15.89 inc VAT
£13.24 ex VATSold out -
Qwiic Button - Red LED
SparkFunOriginal Price £5.28 inc VATCurrent Price £4.12 inc VAT
£3.43 ex VATDESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring...
View full detailsOriginal Price £5.28 inc VATCurrent Price £4.12 inc VAT
£3.43 ex VATSold out -
Arduino MKR Grove Connector Carrier
ArduinoOriginal Price £19.99 inc VATCurrent Price £15.94 inc VAT
£13.28 ex VATDESCRIPTION Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNEC...
View full detailsOriginal Price £19.99 inc VATCurrent Price £15.94 inc VAT
£13.28 ex VATSave 20% -
UV Light Sensor Breakout - VEML6075 (Qwiic) (SEN-15089)
SparkFun£7.99 inc VAT
£6.66 ex VATDESCRIPTION The VEML6075 UV Light Sensor Breakout is SparkFun’s latest ultraviolet sensing solution. The VEML6075 implements a simple photodiode to...
View full details£7.99 inc VAT
£6.66 ex VATSale -
TPS2113A Power Multiplexer Carrier with USB Micro-B Connector
Pololu£6.99 inc VAT
£5.83 ex VATDESCRIPTION This breakout board from Texas Instruments TPS2113A auto-switching power multiplexer allows you to select which of two power sources is...
View full details£6.99 inc VAT
£5.83 ex VATSale -
LED Tactile Button Breakout
Generic / OEM£1.45 inc VAT
£1.21 ex VATDESCRIPTION This simple breakout board makes it easy to use our LED tactile switches on a breadboard, or on your next project. Please Note: Popula...
View full details£1.45 inc VAT
£1.21 ex VATSale -
Energy Harvester - LTC3588 Breakout (BOB-09946)
SparkFun£27.10 inc VAT
£22.58 ex VATDESCRIPTION This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harve...
View full details£27.10 inc VAT
£22.58 ex VATSale -
Particulate Matter Sensor Breakout (for PMS5003)
Pimoroni£2.99 inc VAT
£2.49 ex VATDESCRIPTION A handy-dandy breakout that converts between the picoblade connector cable on the PMS5003 particulate matter sensor and a standard mal...
View full details£2.99 inc VAT
£2.49 ex VATSold out -
Buck Regulator Breakout - 3.3V (AP63203)
Sparkfun Electronics£5.34 inc VAT
£4.45 ex VATDESCRIPTION The SparkFun Buck Regulator Breakout features the AP63203 from Diodes Inc, this breakout board takes advantage of a 2A synchronous buck...
View full details£5.34 inc VAT
£4.45 ex VATSale -
SOIC to DIP Adapter 20-Pin (BOB-00495)
SparkFunOriginal Price £2.04 inc VATCurrent Price £1.60 inc VAT
£1.33 ex VATDESCRIPTION This is a low-cost, basic SOIC breakout board. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are eas...
View full detailsOriginal Price £2.04 inc VATCurrent Price £1.60 inc VAT
£1.33 ex VATSave 22% -
LM3671 3.3V Buck Converter Breakout (ID: 2745)
Adafruit£5.99 inc VAT
£4.99 ex VATDESCRIPTION This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB ...
View full details£5.99 inc VAT
£4.99 ex VATSale -
ATSAMD09 Breakout with seesaw (ID: 3657)
AdafruitOriginal Price £5.99 inc VATCurrent Price £4.07 inc VAT
£3.39 ex VATDESCRIPTION Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcon...
View full detailsOriginal Price £5.99 inc VATCurrent Price £4.07 inc VAT
£3.39 ex VATSave 32% -
2D Barcode Scanner Breakout
Sparkfun Electronics£57.43 inc VAT
£47.86 ex VATDESCRIPTION This 2D Barcode Scanner Breakout is a nifty little breakout board featuring the DE2120 barcode scanner module from DYScan. The DE2120 r...
View full details£57.43 inc VAT
£47.86 ex VATSale -
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch (ID: 2219)
Adafruit£32.71 inc VAT
£27.26 ex VATDESCRIPTION This TFP401 HDMI/DVI Decoder to 40-Pin TTL breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB r...
View full details£32.71 inc VAT
£27.26 ex VATSale -
TLC5940 Breakout (BOB-10616)
SparkFun£16.58 inc VAT
£13.82 ex VATDESCRIPTION The TLC5940 is a 16-channel PWM unit with 12-bit duty cycle control (0-4095), 6-bit current limit control (0-63), and a daisy chainable...
View full details£16.58 inc VAT
£13.82 ex VATSale -
USB 2.0 Type-C Connector Breakout Board (usb07b)
Pololu£2.99 inc VAT
£2.49 ex VATDESCRIPTION This simple board breaks out the power, USB 2.0 data, configuration, and sideband pins of a USB Type-C connector to a 0.1″ spacing that...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Terminal Block Breakout for BBC micro:bit
KitronikOriginal Price £9.77 inc VATCurrent Price £6.54 inc VAT
£5.45 ex VATDESCRIPTION The Terminal Breakout board for the BBC micro:bit does exactly what it says on the tin. It breaks out all of the signal and power pins ...
View full detailsOriginal Price £9.77 inc VATCurrent Price £6.54 inc VAT
£5.45 ex VATSave 33% -
Teensy Prop Shield - LC - Low Cost (no Motion Sensors)
Generic / OEMOriginal Price £9.48 inc VATCurrent Price £6.47 inc VAT
£5.39 ex VATDESCRIPTION This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes. Audio Amplifier-...
View full detailsOriginal Price £9.48 inc VATCurrent Price £6.47 inc VAT
£5.39 ex VATSave 32% -
LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic
Adafruit£13.19 inc VAT
£10.99 ex VATDESCRIPTION Do you know which way the wind blows? You will now, with this triple-axis accelerometer/magnetometer compass module. Inside are two sen...
View full details£13.19 inc VAT
£10.99 ex VATSale -
MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic
Adafruit£6.99 inc VAT
£5.83 ex VATDESCRIPTION This Adafruit MCP23017 I2C GPIO Expander Breakout has 16 GPIO with a matching ground pad. It runs happily from 3V or 5V logic and power...
View full details£6.99 inc VAT
£5.83 ex VATSale -
Photodetector Breakout - MAX30101 (Qwiic)
Sparkfun Electronics£22.81 inc VAT
£19.01 ex VATDESCRIPTION The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout that includes the MAX30101, a highly...
View full details£22.81 inc VAT
£19.01 ex VATSale -
Arduino MKR CAN Shield
Arduino£26.62 inc VAT
£22.18 ex VATDESCRIPTION With this shield, you can easily connect to a CAN (Controller Area Network) Bus. Discover new possibilities of interaction between your...
View full details£26.62 inc VAT
£22.18 ex VATSale -
Arduino MKR Mem Shield
Arduino£15.94 inc VAT
£13.28 ex VATDESCRIPTION The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2 megabytes of flash memory. It also includ...
View full details£15.94 inc VAT
£13.28 ex VATSale -
RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT
Adafruit£22.00 inc VAT
£18.33 ex VATDESCRIPTION If you'd like quickly get started with CAN bus interfacing, with no soldering required, our Adafruit RP2040 CAN Bus Feather comes ready...
View full details£22.00 inc VAT
£18.33 ex VATSale