All Products

DESCRIPTION If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The bi-directional logic level conv...

DESCRIPTION The USB Type-C connector is intended to supersede a wide range of existing USB connectors. It is reversible and can serve in both USB ...

DESCRIPTION This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with off...

DESCRIPTION This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the pop...

DESCRIPTION This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" head...

DESCRIPTION This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 1...

DESCRIPTION This is a breakout board for the very handy 16-Channel Analogue/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rota...

DESCRIPTION This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB...

DESCRIPTION This is the RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The on...

DESCRIPTION The Si5351A clock generator breakout from Adafruit allows you to generate any clock frequency from 8Khz up to 160MHz. The clock genera...

DESCRIPTION FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that'...

DESCRIPTION The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V ...

DESCRIPTION This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a hig...

DESCRIPTIONNot just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. To use with an Arduino, con...

DESCRIPTION The I2C Encoder V2 is a small board where you can use a classical mechanical encoder or an illuminated RGB encoder on I2C bus. The dev...

DESCRIPTION The 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for ...

DESCRIPTION You've always wanted to output analogue voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 i...

DESCRIPTION This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340C and takes advantage of the handy USB-C...

DESCRIPTION This is the Real Time Clock (RTC) Module, this little breakout uses the DS1307 to keep track of the current year, month, day as well ...

DESCRIPTION The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform...

DESCRIPTION The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board com...

DESCRIPTION The Raspberry Pi B+ has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. That's wh...

DESCRIPTION This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standa...

DESCRIPTION The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readi...

DESCRIPTION The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL...

DESCRIPTION An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones), this VL53L1X breakout is easy ...

DESCRIPTION  This Micro SD card adaptor allows you to easily use gigabytes of flash memory with Teensy. It can also be used on a breadboard, or wi...

DESCRIPTION6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltag...

DESCRIPTION The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting i...

DESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the...

DESCRIPTION Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD ...

DESCRIPTION The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potentially ha...

DESCRIPTION The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface €“ that means with just two wires, your microcontroller ca...

DESCRIPTION The Basic:bit is a basic breakout board for the micro:bit. It has a buzzer and three groups of GVS pins(P0/P1/P2) on the board. Each gr...

DESCRIPTION With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to brea...

DESCRIPTION Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same...