All Products

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONThis is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike our other jumper wires t...

DESCRIPTIONStandard 22 AWG solid core black wire.Use this with your bread board or any project in which you need sturdy wire. Comes in small spools...

DESCRIPTION Alligator leads, crocodile clips, whatever your science teacher called them, they're dead useful. They just clip onto anything so you ...

DESCRIPTIONStandard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTIONThis cable turns the 4 pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontroller...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare a...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail ...

DESCRIPTIONNow you can easily connect to your grove modules to any development board of your choosing with 0.1" pitch female header pinsFEATURESLen...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTION This is the official 2.5Amp 5.1V power supply for Raspberry Pi 3 model B/B+. The latest version of the Raspberry Pi cannot be powered ...

DESCRIPTION This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but c...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page r...

DESCRIPTION These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple ju...

DESCRIPTION These are 100mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other f...

DESCRIPTION These 10-pin IDC cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming conn...

DESCRIPTION Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and an...

DESCRIPTION This is a 200mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be...

DESCRIPTION This is DC power jack/connector with breadboard-friendly pins instead of wide solder terminals. They have a 5mm jack, with a 2.1mm cen...

DESCRIPTIONA 14cm long lead with a female 2 pin JST (2mm PH type) connector on one end. The non-plug end is free for you to expose the wire and con...

DESCRIPTION This is a 500mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be...

DESCRIPTION This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but ...

DESCRIPTIONStandard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small s...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the othe...

DESCRIPTION These are 100mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other m...

DESCRIPTION This is a 1.5 metres long cable with a full size USB A plug on one end and a micro plug on the other. The micro format comes in additio...

DESCRIPTION This 1M White Anti-Tangle USB Type-A to Micro-B USB Noodle cable is a flat type USB cable. The new flat design means that the cable res...

DESCRIPTIONEverybody needs one, or two or three... these handy USB cables are perfect for use with many of the USB driven boards we stock. FEATU...

DESCRIPTION Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a ...

DESCRIPTION This adapter consists of a 9V battery clip and a standard 5.5*2.1mm centre positive barrel jack, it supplies to power any device needi...

DESCRIPTIONStandard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small sp...

DESCRIPTION The SparkFun Qwiic system is expanding greatly. But we understand there are other systems out there. The Qwiic to Grove cable allows in...

DESCRIPTION Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART’s mysterious baud rate? Or do you want to reverse engin...

DESCRIPTION Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a ...

DESCRIPTION This is a USB 2.0 type A to miniB 5-pin cable. It is 1.8 metres in length, and uses quality 28AWG wire, which is thicker than lower qu...

DESCRIPTION Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated v...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION This is a CE marked UK plug 5V 2400mA (2.4A) DC power supply. Compatible with electronic projects/components with a 2.1mm x 5.5mm barr...

DESCRIPTION This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC ...

DESCRIPTION This is a CE marked UK plug 12V 3000mA (AA) DC power supply. Compatible with electronic projects/components with a 2.1mm x 5.5mm center...

DESCRIPTIONThis multifunction power supply test line is super useful. Whether you are checking current draw on your new board or trying out some LE...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION This cable is a USB to Serial (TTL level) converter cable. It's identical functionally to the FTDI Cable. It's one of the easiest ways...

DESCRIPTION This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two row...

DESCRIPTION This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables are great for easy...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...