All Products

DESCRIPTION40 way pin header - Extremely useful for making prototyping connections, mounting DIL or SIL components etc. FEATURES Connector Type:W...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTION This is a connector that fits directly to the edge contacts of a BBC Micro-Bit. The connector has 80 pins, but because of the differen...

DESCRIPTIONThis is a 20 pin female header with extra long legs (10.5mm) - The legs are long enough to poke through a pcb and mate with another con...

DESCRIPTIONThis is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike our other jumper wires t...

DESCRIPTIONStandard 22 AWG solid core black wire.Use this with your bread board or any project in which you need sturdy wire. Comes in small spools...

DESCRIPTIONThis cable turns the 4 pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontroller...

DESCRIPTIONStandard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare a...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONSingle row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in ...

DESCRIPTION These are tiny metal pins for the JST SM Male housings that we sell. You will need one pin for every 'hole' that your housing has. Not...

DESCRIPTIONStandard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small s...

DESCRIPTION These 10-pin IDC cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming conn...

DESCRIPTION The USB Type-C connector is intended to supersede a wide range of existing USB connectors. It is reversible and can serve in both USB ...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION These are tiny metal pins for the JST SM Female housings that we sell. You will need one pin for every 'hole' that your housing has. N...

DESCRIPTION This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and hig...

DESCRIPTION This is an easy-to-assemble pan/tilt bracket kit that utilises servos to move on two axes fit for camera and helping-hand applications....

DESCRIPTION This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". Documents: ...

DESCRIPTION These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. ...

DESCRIPTION This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the pop...

DESCRIPTION The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the...

DESCRIPTIONThis is a 40 x 1 right angle pin header. The individual sections are segmented, so it's easy to cut them to match your requirements. 0.1...

DESCRIPTION Grove - Universal 4 Pin connectors are the white 4-pin buckled connector used on Stem, Twigs and the Grove cables, with a pin spacing o...

DESCRIPTION These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of g...

DESCRIPTION This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". FEATURES RESO...

DESCRIPTION This adapter consists of a 9V battery clip and a standard 5.5*2.1mm centre positive barrel jack, it supplies to power any device needi...

DESCRIPTIONStandard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small sp...

DESCRIPTION This is a 3 pin JST SM Female housings. They're type SM and do require additional parts to turn them into a complete plug / connector....

DESCRIPTION This is a 3 pin JST SM Male housings. They're type SM and do require additional parts to turn them into a complete plug / connector. ...

DESCRIPTION These are tiny metal pins for the JST PH housings that we sell. You will need one pin for every 'hole' that your housing has. Ideally ...

DESCRIPTION These are simple 3-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. ...

DESCRIPTION This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi...

DESCRIPTION This is a 2 pin JST plug housings. They're type PH (the smaller type) and do require additional parts to turn them into a complete plu...

DESCRIPTIONThis is a 40 x 3 right angle pin header. The individual sections are segmented, so it's easy to cut them to match your requirements. 0.1...

DESCRIPTION Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able...

DESCRIPTION This is a 10-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". FEATURES RES...

DESCRIPTIONThe header mega pack provides you with a variety of different sized male and female headers and stackable headers and to use with your e...

DESCRIPTIONThis multifunction power supply test line is super useful. Whether you are checking current draw on your new board or trying out some LE...

DESCRIPTION 40 way pin header with 2 rows - Extremely useful for making prototyping connections, mounting DIL or SIL components. FEATURES Connec...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC ...

DESCRIPTION Grove - Universal 4 Pin connector 90° are white 4-pin buckled connectors which can be used with Stem, Twigs and the Grove cables. The p...

DESCRIPTION This 2x20 tall header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the...

DESCRIPTION The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform...

DESCRIPTIONThe mega shield header kit provides you with the correct sized stackable female headers to fit with most Arduino Mega shield projects. T...