All Products

DESCRIPTION The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 chan...

DESCRIPTION Brand new and better than ever, the Adafruit GPS shield kit has been replaced with this assembled shield that comes with an Ultimate G...

DESCRIPTIONThis lead has a u.FL RF connector on one end and a SMA RF screw connector on the other. To be uber clear, the SMA is 'female' in constru...

DESCRIPTION The Dragino Lora/GPS HAT is an expansion module for LoRaWan and GPS for use with Raspberry Pi. This product is intended for those inte...

DESCRIPTION The XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to the Qwiic Connect System. Equipped with the X...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page...

DESCRIPTION The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with GNSS boards equipped with a U.FL at a fra...

DESCRIPTION Cellular + GPS tracking, all in one, for your Arduino? Oh yes! Introducing FONA 808 GSM + GPS Shield, an all-in-one cellular phone mod...

DESCRIPTION Arduino MKR GSM 1400 has been designed to offer a practical and cost effective solution for makers seeking to add global GSM connectiv...

DESCRIPTION The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-chan...

DESCRIPTION With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means ...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page...

DESCRIPTION The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With th...

DESCRIPTION What is the best chip antenna for your GNSS project? There are tons to choose from, but finding the right one might be tricky so here'...

DESCRIPTION The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturised, GPS board that is perfect for applications that don't possess a lo...

DESCRIPTION This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial comm...

DESCRIPTION This is the latest version of the Venus GPS board; the smallest, most powerful, and most versatile GPS receiver we carry. It's based o...

DESCRIPTION Locate your stuff! The asset tracker kit 2G contains all of the pieces you need to build a GSM + GPS location tracker for your most pr...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page r...

DESCRIPTION The OBD Ⅱ Slaver allows you to hack your vehicle with the integrated OBD port and output all the data via a serial interface. It suppo...

DESCRIPTION With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means t...

DESCRIPTION This miniature GPS breakout is only 1" x 1" (~ 25mm x 25mm) but houses a complete GPS/GNSS solution with both I2C and UART interfaces....

DESCRIPTION This GPS is built with a NEO-M8N, U-Blox M8 concurrent GNSS modules and comes with an active Antenna. The NEO-M8 series provides high ...

DESCRIPTION This is a more universal GPS breakout board that uses a vertical SMD connector for any of the EM401 or EM406 GPS module cables that we...

DESCRIPTION This module is the best way to add a GPS to your wearable project. Installed on the PCB is the latest of the Ultimate GPS modules, a s...

DESCRIPTION The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other periph...

DESCRIPTION With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30seconds. This means t...

DESCRIPTIONA Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. O...

DESCRIPTIONSMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and the PG31 GPS...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page ...

DESCRIPTION The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 se...

DESCRIPTION This antenna is a perfect addition to your cellular project with LTE connectivity. It's specifically intended for use with the Pycom LT...

DESCRIPTION The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This l...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page...

DESCRIPTION Communication cable, 1.75" in length, that connects the EM406a GPS unit. The EM406 comes with a cable, this is sold as a spare. Cable ...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page ...

DESCRIPTION Hook your Arduino up to GSM/GPRS cell phone networks with the GPRS shield! Use your Arduino, Seeeduino and other main boards to dial a...

DESCRIPTION The Wio Terminal Chassis - LoRa-E5 and GNSS is a LoRaWAN communication extension board for Seeed Wio-Terminal Dev Board. It is embedde...

DESCRIPTION This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics, desi...

DESCRIPTION This SIRF Star III GPS Engine from US Global Sat is a only a little bigger than a 50 pence piece, but out-performs many of its bigger ...