All Products

DESCRIPTION The Adafruit motor shield kit for Arduino gives you the ability to drive up to 4 DC motors or 2 stepper motors and can be stacked to a...

DESCRIPTION The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) ...

DESCRIPTION The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface an...

DESCRIPTION With this 16 channel 12-bit PWM servo driver, using only two pins, you can control 16 free-running PWM outputs! You can even chain up ...

DESCRIPTION The SparkFun servo trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or l...

DESCRIPTION The Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor ...

DESCRIPTION The DRV2605 from Texas Instruments is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed s...

DESCRIPTION This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating volta...

DESCRIPTION The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over U...

DESCRIPTION Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors...

DESCRIPTION Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TT...

DESCRIPTION This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick conf...

DESCRIPTION The 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller w...

DESCRIPTION The Micro Maestro is the first of Pololu's second-generation USB servo controllers. It features three (yes three!) control methods... ...

DESCRIPTION This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver is Pololu’s latest stepper motor driver. The module ...

DESCRIPTION The Tic 36v4 High-Power Stepper Motor Controller uses discrete MOSFET H-bridges, allowing it to control large stepper motors that dema...

DESCRIPTION This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver is Pololu’s latest stepper motor driver. The module ...

DESCRIPTION The Simple High-Power Motor Controller 18v15 makes basic control of brushed DC motors easy, with the free Simple Motor Control Center ...

DESCRIPTION This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its i...

DESCRIPTION The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or drive one stepper motor up to 12V/1.2A. The on-boar...

DESCRIPTION The jrk 21v3 is a versatile, general-purpose motor controller that supports a variety of interfaces, including USB. The broad operati...

DESCRIPTION The Tic T825 USB multi-interface stepper motor controller makes basic control of a stepper motor easy, with quick configuration over ...

DESCRIPTION The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over U...

DESCRIPTION This breakout board for Toshiba’s TB67S249FTG microstepping bipoloar stepper motor driver is arranged in the popular 16-pin Pololu for...

DESCRIPTION Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver. This board breaks out Texas Instr...

DESCRIPTION This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, brushed DC motors with an Ar...

DESCRIPTION This compact motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick confi...

DESCRIPTION This breakout board for STMicro’s STSPIN820 microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and a w...

DESCRIPTION This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using the free softwa...

DESCRIPTION The Grove - 16-Channel PWM Driver is based on NXP PCA9685, is a 16-Channel, 12 bit I2C PWM driver. This board can drive up to 16 servo...

DESCRIPTION The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It i...

DESCRIPTION Have a nice new stepper motor but can't find any suitable driver to use it with? This tiny, and high-performance motor driver is waiti...

DESCRIPTION Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion ...

DESCRIPTION This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a...

DESCRIPTION This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick conf...