Translation missing: en.general.accessibility.skip_to_content

Amplified Speaker

SKU 3423
1 review
£10.37 inc VAT
£8.64 ex VAT
2 in stock.

The MonkMakes Powered Speaker is an easy to use amplified speaker on a PCB.

The board needs a 5V power supply that can be provided by either a Raspberry Pi or an Arduino. The audio input will normally be to the 3.5mm stereo audio jack socket, which is mixed to a mono signal as there is just a single speaker on the board.

A direct audio connection (AC coupled) is also provided by the pin labelled AUDIO next to the power pins.

Please note that the AUDIO pin is not suitable for direct connection to unfiltered logic-level PCM that you might produce from a Raspberry Pi. It is however just fine for something like the audio output of an FM receiver or MP3 player module.