Translation missing: en.general.accessibility.skip_to_content

Maker UNO - Educational Kit

SKU 3147
Sold out
£16.49 inc VAT
£13.74 ex VAT

The Maker UNO - Educational Kit is an Arduino based kit with a range of additional components that make it the perfect kit for education and learning to code.

Spend less time worrying about wiring and more time coding, the included Maker UNO has 12 built-in LEDs, a Piezo Buzzer, a programmable button and all the same features you know and love from the Arduino Uno.

Maker UNO - Educational KitThe hardest part about teaching electronics is that most students don't have basic knowledge of electronics. While some might have some experience with circuits the majority will not understand the circuit/wiring diagrams used when connecting sensors and devices to an Arduino. This means they'll spend a substantial amount of time just connecting wires and trying to troubleshoot why it's not working. With the Maker UNO these issues are removed! Start coding right away and see your board light up and plays melodies in no time. 

Maker UNO - Educational Kit

Please Note: 

  • The Maker UNO does not have a Vin pin so some shields may not be compatible.

Kit Includes:

  • 1 x Maker UNO
  • 1 x USB micro-B cable
  • 3 x 5mm Red LEDs
  • 3 x 5mm Yellow LEDs
  • 3 x 5mm Green LEDs
  • 1 x Small Breadboard
  • 40 x Male to Male Jumper Wire
  • 10 x 220R Resistor (0.25W 5%)
  • 5 x 1K Resistor (0.25W 5%)
  • 5 x 10K Resistor (0.25W 5%)
  • 1 x LDR
  • 1 x Transistor (2N2222)
  • 1 x Finger Adjust Preset (10K)
  • 1 x 3V Miniature Brush Motor
  • 1 x 4 Blade 56mm Motor Propeller
  • 1 x Plastic Storage Box

Board Specifications:

  • Microcontroller: ATmega328P
  • Programming IDE: Arduino IDE
  • Operating Voltage: 5V
  • Digital I/O Pins: 20
  • PWM: 6
  • Analogue Inputs: 6
  • UART: 1
  • SPI: 1
  • I2C: 1
  • External Interrupts: 2
  • Flash Memory: 32KB
  • SRAM: 2KB
  • EEPROM/Data Flash: 1KB
  • Clock Speed: 16 MHz
  • DC Current per I/O Pin: 20mA
  • Power Supply: USB Only
  • DC Current for 5V: USB Source
  • DC Current for 3.3V: 500mA
  • USB to Serial Chip: CH340G
  • Programmable LEDs: 12 LEDs from D2 - D13
  • Programmable Buttons: 1 (Pin D2)
  • Programmable Buzzers: 1 (Pin D8