All Products

DESCRIPTION This is a high-quality solderless prototyping breadboard. Each row/column has a letter or a number, and there are two double rail power...

DESCRIPTION40 way pin header - Extremely useful for making prototyping connections, mounting DIL or SIL components etc. FEATURES Connector Type:W...

DESCRIPTION This is a connector that fits directly to the edge contacts of a BBC Micro-Bit. The connector has 80 pins, but because of the differen...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONThis is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike our other jumper wires t...

DESCRIPTIONThis is a 20 pin female header with extra long legs (10.5mm) - The legs are long enough to poke through a pcb and mate with another con...

DESCRIPTIONStandard 22 AWG solid core black wire.Use this with your bread board or any project in which you need sturdy wire. Comes in small spools...

DESCRIPTIONStandard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTIONThis cable turns the 4 pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontroller...

DESCRIPTION This massive kit has 280 parts! The electronic parts kit is a comprehensive selection of components for making a wide variety of elect...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail ...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare a...

DESCRIPTION The Cool Components Resistor Kit contains over 400 0.25W resistors in a range of different values all packed in a reusable component b...

DESCRIPTION This is bog-standard, copper stripboard or Veroboard. It has 0.1" spaced holes and the strips run lengthways. Dimensions: 16 x 10 cm

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONThis is the Grove base shield as seen in the Grove starter kits for Arduino. It lets you connect Grove components easily to your Arduino...

DESCRIPTIONSingle row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in ...

DESCRIPTION This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but c...

DESCRIPTION This white solderless breadboard is a high quality prototyping breadboard. Each row / column has a letter or a number, and there are tw...

DESCRIPTIONThis medium sized, high-quality breadboard is great for prototyping and testing circuits, it has 5 colour coded screw terminals located ...

DESCRIPTION This is a 200mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be...

DESCRIPTION These 10-pin IDC cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming conn...

DESCRIPTION This is a 500mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be...

DESCRIPTION These are tiny metal pins for the JST SM Male housings that we sell. You will need one pin for every 'hole' that your housing has. Not...