All Products

DESCRIPTIONThis 2x AAA battery holder with switch and lid comes with a 2 pin JST connector and is compatible with the BBC micro:bit. It is fitted w...

DESCRIPTION The I2CDriver is an easy-to-use, open source tool for controlling I2C devices. It works with Windows, Mac, and Linux, and has a built-...

DESCRIPTION This 32GB Class 10 Micro SD Memory Card is designed to meet the storage demands of high quality and large-volume digital still and vide...

DESCRIPTION Go retro with this wired, USB game controller in the classic "NES" design.This is not an official Nintendo product, but a 3rd party USB...

DESCRIPTION Go retro with this wired, USB game controller in the classic "SNES" design.This is not an official Nintendo product, but a 3rd party US...

DESCRIPTION Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheat...

DESCRIPTION This is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Specification: Large plate: 14 x 14 x 6mm Small plate: 8....

DESCRIPTION This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30...

DESCRIPTIONThis 2x AAA battery holder with 2 pin JST connector is compatible with the BBC micro:bit. It is fitted with 145mm colour coded power lea...

DESCRIPTION These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply...

DESCRIPTIONSimple 4 Cell AA Battery holder with 5" tinned leads, square configuration.FEATURESRESOURCES

DESCRIPTION LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfort...

DESCRIPTION This 2x AA battery holder with 2 pin JST connector is compatible with the BBC micro:bit. It is fitted with ~150mm colour coded power le...

DESCRIPTION The DRV2605 from Texas Instruments is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed s...

DESCRIPTION The PIxy2 pan-tilt makes a great “hello world” application for Pixy2.  It’s easy to assemble and it gives your Pixy2 something to do: ...

DESCRIPTION These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply...

DESCRIPTION This LED driver power supply is ideal for powering your RGB LED addressable strips and LED displays. It takes an input of 240V at 2.5A...

DESCRIPTION The Grove - Screw&Nut Pack (20 Sets) is used for the mounting of the Grove module. Includes: PM2.0xH5.0mm-Nylon-White Screw x 20 M...

DESCRIPTION It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can...

DESCRIPTION Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries. FEATURES RESOURCES Do...

DESCRIPTION Use your BBC micro:bit to its full potential with the Cool Components Breakout:Bit. this edge connector has been designed to allow you ...

DESCRIPTION This 64GB Class 10 Micro SD Memory Card is designed to meet the storage demands of high quality and large-volume digital still and vide...

DESCRIPTION This is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and col...

DESCRIPTION The Photon battery shield provides you with an easy way to power your Photon module with a Lithium polymer battery. Not only can the b...

DESCRIPTION The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboar...

DESCRIPTION Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmw...

DESCRIPTION Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same...

DESCRIPTION Protect your Arduino Uno from unwanted scratches and damage with this protective case! It was specifically designed to fit the official...

DESCRIPTION PowerBoost 1000 Basic is the perfect power supply for your power-hungry portable project. This little DC/DC boost converter module can...

DESCRIPTION This is a basic 12 button keypad that has been designed for easy user input and functionality. The buttons are set up in a matrix form...

DESCRIPTION One can never have enough socks or USB ports. Add some more USB capability to your Raspberry Pi Zero, or any other single-board comput...

DESCRIPTION The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from scratches, ...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page r...

DESCRIPTION The 8Bitdo SF30 Pro wireless Bluetooth game controller has the classic D-pad and button layout, it reminds you of games consoles from t...

DESCRIPTION This lens gives your OpenMV Cam the ability to see a wider field-of-view (FOV). The standard lens that ships with your OpenMV Cam has a...