Arduino

DESCRIPTION This is the extremely popular Arduino Uno R3 - based on the atmega328P processor. It's the perfect Arduino board to get started with. W...

DESCRIPTION This is the Adafruit Feather HUZZAH ESP8266 -  an 'all-in-one' WiFi development board with built in USB and battery charging. Its an ES...

DESCRIPTIONThe Adafruit motor shield kit for Arduino gives you the ability to drive up to 4 DC motors or 2 stepper motors and can be stacked to add...

DESCRIPTIONThe Arduino Pro Mini is SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mi...

DESCRIPTION Learn to code with this electronically upgraded, super hackable, fidget spinner. Perfect for S.T.E.M. learning projects the Lightino us...

DESCRIPTIONThe shield header kit provides you with the correct sized stackable female headers to fit with most Arduino shield projects. The headers...

DESCRIPTION This is 30 feet of conductive thread spun from stainless steel fibre and wound on a plastic bobbin. Use it to sew up all of your e-text...

DESCRIPTION The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used ...

DESCRIPTIONTrinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chi...

DESCRIPTIONThe Teensy LC (Low Cost) is a breadboard-friendly development board with bootloader and micro USB. It is a 32 bit microcontroller board ...

DESCRIPTION This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your ...

DESCRIPTION The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/o...

DESCRIPTION This is the Teensy Audio board add-on for the Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 development boards. This audio board provides you with a...

DESCRIPTIONThis is the Feather 32u4 Bluefruit LE - an 'all-in-one' Arduino-compatible + Bluetooth Low Energy development board with built in USB an...

DESCRIPTIONThe Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it c...

DESCRIPTION A simple cheap starter kit for the Arduino Uno R3. This simple set of components will allow you to get up to speed with Arduino code qu...

DESCRIPTIONThis is a tiny 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder...

DESCRIPTION The EtherMega is a 100% Arduino Mega 2560 compatible board that can talk to the world. Do Twitter updates automatically, serve web page...

DESCRIPTIONThis is an extremely neat, well thought out box that will accept an Arduino Uno (or same footprint), or Mega 2560. There is enough room ...

DESCRIPTION This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using compone...

DESCRIPTIONAdd some sizzle to your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection and a ca...

DESCRIPTIONA simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Bue...

DESCRIPTIONThe header mega pack provides you with a variety of different sized male and female headers and stackable headers and to use with your e...

DESCRIPTIONThe LilyPad Simple just got a whole lot... simpler. The Simple board has been updated to create the LilyPad USB by replacing the classic...

DESCRIPTIONThis is a new Arduino-compatible microcontroller from SFE. The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. ...

DESCRIPTIONBrand new and better than ever, the Adafruit GPS shield kit has been replaced with this assembled shield that comes with an Ultimate GPS...

DESCRIPTION Bend all audio files to your will with the Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decodi...

DESCRIPTION The Zumo robot is an Arduino-controllable tracked robot platform that is less than 10 cm x 10 cm - small enough to qualify for Mini Sum...

DESCRIPTIONThe Spectrum Shield features the MSGEQ7 graphic equalizer display filter, the same IC used in the Colorganic Spectralizer kit. Two of th...

DESCRIPTIONThis Grove bundle starter kit comes with an Arduino Uno development board included for you to get up and running with your projects. The...

DESCRIPTION The Arduino Leonardo is a microcontroller board based on the ATmega32u4 . It has 20 digital input/output pins (of which 7 can be used a...

DESCRIPTION We use many Arduinos and we're always looking for the simplest, most stable one. Each board is a bit different and no one board has eve...

DESCRIPTION What's smaller than a Feather but larger than a Trinket? It's an Itsy Bitsy! Small, powerful, Arduino-compatible - this microcontroller...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page ...

DESCRIPTION The EtherTen is a 100% Arduino compatible board that can talk to the world. Do Twitter updates automatically, serve web pages, connect ...

DESCRIPTIONThe new Proto Shield is a convenient way to add circuitry to your Genuino - fitting comfortably on top UNO, Mega, Zero, and 101 boards. ...

DESCRIPTIONThe MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED di...

DESCRIPTIONThe Pololu A-Star 32U4 Micro is a general-purpose programmable module based on Atmel's ATmega32U4 AVR microcontroller, which has 32 KB o...

DESCRIPTION So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside yo...

DESCRIPTIONThe Seeeduino V4.2 is an Arduino-compatible board, which is based on Atemga328P MCU. The Arduino UNO based bootloader with an ATMEGA16U2...

DESCRIPTION Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for make...

DESCRIPTIONSpice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2....

DESCRIPTIONThis new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functiona...

DESCRIPTIONThe Feather M0 Express is specifically designed for use with CircuitPython (created by Adafruit), a beginner orientated version of Micro...

DESCRIPTIONThis is the Feather 32u4 LoRa Radio (RFM9x) with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. ...

DESCRIPTION We designed this board to give the user a very discreet button without any sharp edges. Button closes when you push it and opens when y...

DESCRIPTION What's smaller than a Feather but larger than a Trinket? It's an Itsy Bitsy! Small, powerful, Arduino-compatible - this microcontroller...