translation missing: en.general.accessibility.skip_to_content

Arduino IoT MKR1000 WIFI Bundle

by Arduino
SKU 2383
Sold out
£78.98 inc VAT
£65.82 ex VAT

RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page remains available for its resources and as a source of potential interest.

The MKR IoT Bundle is a great way to get started with the Internet of Things!

The bundle includes the components you need to make 5 IoT projects following the step-by-step online tutorials on the Arduino Project Hub online platform.

It walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform. The MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments.

The kit is based around the MKR1000 a powerful board that combines the functionality of the Zero and the Wi-Fi Shield‚ and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes:

  • 1 Arduino MKR1000 board, with header soldered.
  • 1 micro USB cable,
  • 1 400-point breadboard,
  • 70 solid-core jumper wires,
  • 1 9V battery snap,
  • 1 stranded jumper wire
  • 1 stranded jumper wire,
  • 6 phototransistors,
  • 3 potentiometers (10 kilohm),
  • 10 pushbuttons,
  • 1 temperature sensor (TMP36),
  • 1 tilt sensor,
  • 1 alphanumeric LCD (16 x 2 characters),
  • 1 bright white,
  • 34 LEDs (1 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue),
  • 1 small DC motor (6/9V),
  • 1 small servo motor,
  • 1 piezo capsule (PKM17EPP-4001-B0),
  • 1 H-bridge motor driver (L293D),
  • 1 octocouplers (4NE5),
  • 2 MOSFET transistors (IRF520),
  • 5 capacitors (100uF),
  • 5 diodes (1N4007),
  • 3 transparent gels (R,G,B)
  • 1 male pin strip (40 x 1),
  • 20 resistors (220 ohm),
  • 5 resistors (560 ohm),
  • 5 resistors (1 kilohm),
  • 5 resistors (4.7 kilohm),
  • 20 resistors (10 kilohm),
  • 5 resistors (1 megohm),
  • 5 resistors (10 megohm)

Please note, don't connect 9V to the board, as it will be damaged.
You can use the 9V Battery strip to supply an external component.