Filters
Arduino
-
Sale
Adafruit Motor Shield Kit for Arduino v2.3 (ID: 1438)
Adafruit£19.86 inc VAT
£16.55 ex VAT5DESCRIPTIONThe Adafruit motor shield kit for Arduino gives you the ability to drive up to 4 DC motors or 2 stepper motors and can be stacked to add...
View full details£19.86 inc VAT
£16.55 ex VATSale -
Sale
Gameduino 3X
Cool Componentsfrom £36.98 inc VAT4DESCRIPTION In 2011 the original Gameduino brought vintage gaming to the Arduino. In 2013 Gameduino 2 set a new standard in hand-held open-source g...
View full detailsfrom £36.98 inc VATSale -
Sale
Shield Header Kit
Cool Components£2.99 inc VAT
£2.49 ex VAT2DESCRIPTIONThe shield header kit provides you with the correct sized stackable female headers to fit with most Arduino shield projects. The headers...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Sale
Teensy Audio Board
PJRC£17.98 inc VAT
£14.98 ex VATDESCRIPTION This is the Teensy Audio board add-on for the Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 development boards. This audio board provides you with a...
View full details£17.98 inc VAT
£14.98 ex VATSale -
Sale
Relay Shield V3.0
Seeed£17.99 inc VAT
£14.99 ex VATDESCRIPTIONThe Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it c...
View full details£17.99 inc VAT
£14.99 ex VATSale -
Sale
2.8" TFT Touch Shield for Arduino w/Capacitive Touch (ID: 1947)
Adafruit£43.98 inc VAT
£36.65 ex VAT1DESCRIPTIONAdd some sizzle to your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection and a ca...
View full details£43.98 inc VAT
£36.65 ex VATSale -
Sale
Qwiic Shield for Arduino (DEV-14352)
SparkFun£5.99 inc VAT
£4.99 ex VAT1DESCRIPTION The Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-base...
View full details£5.99 inc VAT
£4.99 ex VATSale -
Sale
Header Mega Pack
Cool Components£14.99 inc VAT
£12.49 ex VATDESCRIPTIONThe header mega pack provides you with a variety of different sized male and female headers and stackable headers and to use with your e...
View full details£14.99 inc VAT
£12.49 ex VATSale -
Sale
Ultimate GPS Logger Shield - Includes GPS Module (ID: 1272)
Adafruit£41.99 inc VAT
£34.99 ex VATDESCRIPTIONBrand new and better than ever, the Adafruit GPS shield kit has been replaced with this assembled shield that comes with an Ultimate GPS...
View full details£41.99 inc VAT
£34.99 ex VATSale -
Sale
Music Maker MP3 Shield for Arduino w/3W Stereo Amp (ID: 1788)
Adafruit£34.74 inc VAT
£28.95 ex VATDESCRIPTION Bend all audio files to your will with the Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decodi...
View full details£34.74 inc VAT
£28.95 ex VATSale -
Sale
Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors)
Pololu£79.96 inc VAT
£66.63 ex VATDESCRIPTION The Zumo robot is an Arduino-controllable tracked robot platform that is less than 10 cm x 10 cm - small enough to qualify for Mini Sum...
View full details£79.96 inc VAT
£66.63 ex VATSale -
Sale
Spectrum Shield (DEV-13116)
SparkFun£25.19 inc VAT
£20.99 ex VATDESCRIPTIONThe Spectrum Shield features the MSGEQ7 graphic equalizer display filter, the same IC used in the Colorganic Spectralizer kit. Two of th...
View full details£25.19 inc VAT
£20.99 ex VATSale -
Sale
Proto Shield Rev3
Arduino£10.76 inc VAT
£8.97 ex VATDESCRIPTIONThe new Proto Shield is a convenient way to add circuitry to your Genuino - fitting comfortably on top UNO, Mega, Zero, and 101 boards. ...
View full details£10.76 inc VAT
£8.97 ex VATSale -
Sold out
SmartMatrix Shield V4 for Teensy 3
PixelMatix£25.93 inc VAT
£21.61 ex VATDESCRIPTION So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside yo...
View full details£25.93 inc VAT
£21.61 ex VATSold out -
Sale
MP3 Player Shield (DEV-12660)
SparkFun£28.37 inc VAT
£23.64 ex VATDESCRIPTIONThis new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functiona...
View full details£28.37 inc VAT
£23.64 ex VATSale -
Sale
DRV8835 Dual Motor Driver Shield for Arduino
Pololu£5.92 inc VAT
£4.93 ex VATDESCRIPTION This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its in...
View full details£5.92 inc VAT
£4.93 ex VATSale -
Sale
8-Channel Relay Driver Shield for Arduino
Freetronics£19.61 inc VAT
£16.34 ex VATDESCRIPTION Drive up to 8 relays from your Arduino using just 2 I/O pins with this shield. It communicates with your board using I2C, so you can ev...
View full details£19.61 inc VAT
£16.34 ex VATSale -
Sale
Arduino ProtoShield Kit (DEV-13820)
SparkFun£10.88 inc VAT
£9.07 ex VATDESCRIPTION The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to...
View full details£10.88 inc VAT
£9.07 ex VATSale -
Sale
NFC Shield V2.0
Seeed£29.28 inc VAT
£24.40 ex VATDESCRIPTIONShort for Near Field Communication, NFC is a widely used technology around us. It's behind daily applications such as contactless paymen...
View full details£29.28 inc VAT
£24.40 ex VATSale -
Sale
Sparkfun XBee Shield (WRL-12847)
SparkFun£15.49 inc VAT
£12.91 ex VAT1DESCRIPTION XBee radios are an awesome way to add wireless capability to your Arduino project and now it's even easier with the SparkFun XBee Shiel...
View full details£15.49 inc VAT
£12.91 ex VATSale -
Sale
ProtoScrewShield (DEV-09729)
SparkFun£15.50 inc VAT
£12.92 ex VATDESCRIPTIONThe ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino...
View full details£15.50 inc VAT
£12.92 ex VATSale -
Sale
Shield Header Kit - Right Angle
Cool Components£2.99 inc VAT
£2.49 ex VATDESCRIPTIONThe shield header kit provides you with the correct sized stackable female headers to fit with most Arduino shield projects. The headers...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Sale
Power-over-Ethernet Regulator 802.3af
Freetronics£23.20 inc VAT
£19.33 ex VATDESCRIPTION The 802.3AF Power-over-Ethernet regulator module mounts on an Ethernet Shield, EtherTen or Ethermega to allow it to accept power at a n...
View full details£23.20 inc VAT
£19.33 ex VATSale -
Sale
MIDI Shield Kit (DEV-12898)
SparkFun£23.99 inc VAT
£19.99 ex VATDESCRIPTION Note: This product is a kit and requires some soldering. The MIDI Shield board gives your Arduino access to the powerful MIDI communica...
View full details£23.99 inc VAT
£19.99 ex VATSale -
Sale
MUX Shield II
Mayhew Labs£29.78 inc VAT
£24.82 ex VATDESCRIPTIONSometimes you've got way too many inputs, or outputs... or both. How are you going to get them all connected to your Arduino? The Mux Sh...
View full details£29.78 inc VAT
£24.82 ex VATSale -
Sale
mbed Application Shield
mbed£37.20 inc VAT
£31.00 ex VATDESCRIPTIONThis is a peripherals shield - principally designed for mbed development boards with an Arduino form factor, it can actually be used wit...
View full details£37.20 inc VAT
£31.00 ex VATSale -
Sale
Arduino USB Host Shield
Arduino£28.80 inc VAT
£24.00 ex VATDESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page ...
View full details£28.80 inc VAT
£24.00 ex VATSale -
Sale
16x2 Display and Keypad Shield
Freetronics£15.72 inc VAT
£13.10 ex VATDESCRIPTION The LCD and Keypad Shield gives you a handy 16-character by 2-line display, 5 buttons and a controllable backlight, plug it straight in...
View full details£15.72 inc VAT
£13.10 ex VATSale -
Sale
Dual TB9051FTG Motor Driver Shield for Arduino
Pololu£16.00 inc VAT
£13.33 ex VATDESCRIPTION This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, brushed DC motors with an Ard...
View full details£16.00 inc VAT
£13.33 ex VATSale -
Sale
Mega Protoshield for Arduino (ID: 192)
Adafruit£19.09 inc VAT
£15.91 ex VATDESCRIPTIONThe Mega protoshield for Arduino is an extra large proto-shield, specifically designed for the Arduino Mega 2560 R3! It comes with PCB, ...
View full details£19.09 inc VAT
£15.91 ex VATSale -
Sale
Arduino Mega Proto Shield Rev3 (PCB)
Arduino£6.02 inc VAT
£5.02 ex VATDESCRIPTION The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create ...
View full details£6.02 inc VAT
£5.02 ex VATSale -
Sale
CAN BUS Shield (DEV-13262)
SparkFun£31.96 inc VAT
£26.63 ex VATDESCRIPTION The CAN-BUS Shield provides your Arduino or Genuino with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows y...
View full details£31.96 inc VAT
£26.63 ex VATSale -
Sale
LCD Button Shield V2 (DEV-13293)
SparkFun£16.99 inc VAT
£14.16 ex VATDESCRIPTION Do you need an easy to use interface for your LCD screen? The LCD Button Shield V2 attaches to your Arduino to provide a 16x2, black ch...
View full details£16.99 inc VAT
£14.16 ex VATSale -
Sale
Monster Moto Shield (DEV-10182)
SparkFun£59.57 inc VAT
£49.64 ex VATDESCRIPTIONThis is essentially a ramped up version of the Ardumoto motor driver shield. For this monster shield the L298 H-bridge has been replaced...
View full details£59.57 inc VAT
£49.64 ex VATSale -
Sale
MiniGen - Pro Mini Signal Generator Shield (BOB-11420)
SparkFun£25.52 inc VAT
£21.27 ex VATDESCRIPTIONThis is the MiniGen Signal Generator, a small shield for the Arduino Pro Mini that is capable of generating sine, square, or triangle wa...
View full details£25.52 inc VAT
£21.27 ex VATSale -
Sale
Arduino Motor Shield Rev3
Arduino£25.19 inc VAT
£20.99 ex VATDESCRIPTION The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such a...
View full details£25.19 inc VAT
£20.99 ex VATSale