Currently On Sale

DESCRIPTION Everybody needs one, or two or three... these handy USB cables are perfect for use with many of the USB driven boards we stock. FEATURE...

DESCRIPTION These are 100mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other m...

DESCRIPTION SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and the PG31 GP...

DESCRIPTION This cable is a USB to Serial (TTL level) converter cable. It's identical functionally to the FTDI Cable. It's one of the easiest ways ...

DESCRIPTION This is an extra long communication cable, 1 foot in length, that mates with the EM406 and EM401. Cut and hack this cable to your needs...

DESCRIPTION This is a 1.5 metres long cable with a full size USB A plug on one end and a micro plug on the other. The micro format comes in additio...

DESCRIPTION This 6-inch (150-mm), twisted cable has 22-AWG wires and female

DESCRIPTION Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a ...

DESCRIPTION Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information o...

DESCRIPTION Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated v...

DESCRIPTIONThis is a standard RJ45/LAN/Ethernet/Network cable for all your internet network needs. The cable is 1.8m (6ft) long and is terminate...

DESCRIPTION This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables have bare wires ...

DESCRIPTION This is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike other jumper wires the pla...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...

DESCRIPTION Alligator leads, crocodile clips, whatever your science teacher called them, they're dead useful. They just clip onto anything so you ...

DESCRIPTION Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small ...

DESCRIPTION Standard 22 AWG solid Brown hook-up wire. Use this with your breadboard or any project in which you need sturdy wire. Comes in small sp...

DESCRIPTION This is a 1.5m HDMI 1.4 cable. It supports 1080P, 4K, 3D video, Audio Return and Ethernet.

DESCRIPTION This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, ce...

DESCRIPTION This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and ge...

DESCRIPTION These 10-pin IDC cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming conn...

DESCRIPTION This HDMI to DVI converter cable is perfect if you need to use your Raspberry Pi with an older style monitor that has neither HDMI nor ...

DESCRIPTION The USB Cable with Switch - A to Micro B will work with any device that has a microUSB port. Perfect for charging your Raspberry Pi - e...

DESCRIPTION Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and an...

DESCRIPTION This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables are great for easy pr...

DESCRIPTION This is the perfect cable choice for those that want to output music or general sound for the BBC micro:bit, to either headphones or sp...

DESCRIPTION This 1M White Anti-Tangle USB Type-A to Micro-B USB Noodle cable is a flat type USB cable. The new flat design means that the cable res...

DESCRIPTION This 50cm blue Flotilla rope (micro B to micro B) and are perfect for connecting your Flotilla modules to the Dock, they're high-spec c...

DESCRIPTION This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable monitor ...

DESCRIPTION USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host t...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION The MKR2UNO Adapter allows you to turn your Arduino UNO form factor-based project into an MKR-based one without too much effort! You ca...

DESCRIPTION This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ850io or WIZ820io ethernet module with Teen...

DESCRIPTION Developing with flat flex cables? What The Flex will help you break out the cable to a friendly 2.54mm header. Use up to 30-way connect...

DESCRIPTION These cables have six 28 AWG wires and a 6-pin female JST SH-type connector that works best with Micro Metal Gearmotor Encoders with t...

DESCRIPTION The official white Raspberry Pi micro HDMI to HDMI (A/M) cable is designed for the Raspberry Pi 4 computer. FEATURES 19-pin HDMI Type ...

DESCRIPTION This is the official Raspberry Pi Micro-HDMI to HDMI adapter This cable allows you to use a standard HDMI cable with your Raspberry Pi ...

DESCRIPTION Our rolls of 22/26 AWG hook-up wire are great for use with your breadboard or any project in which you need sturdy wires. This set come...

DESCRIPTION Our rolls of 22/26 AWG hook-up wire are great for use with your breadboard or any project in which you need sturdy wires. This set come...

DESCRIPTION This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connectin...

DESCRIPTION If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH com...