Currently On Sale

DESCRIPTION The Grove Starter Kit for Photon is an easy to use plug-and-play kit for the Photon - The base shield lets you connect a variety of Gr...

DESCRIPTION The Grove Mesh Kit for nRF52840-MDK is a very versatile mesh networking development kit. It integrates the nRF52840-MDK development bo...

DESCRIPTION The Arduino shield and Grove breakout for LinkIt Smart 7688 Duo allow you to use Arduino shields with the Duo and have the same pin con...

DESCRIPTION The Grove - CO2 Sensor module is an infrared CO2 sensor with high sensitivity and resolution. The MH-Z16 infra-red CO2 sensor is a gene...

DESCRIPTION The GrovePi+ starter kit for the Raspberry Pi is a powerful platform for prototyping. It uses a Plug'n'Play system of connectors that w...

DESCRIPTION The Grove starter kit for LinkIt Smart 7688 Duo contains 9 Grove modules including sensors, OLED display, relay and infrared transmitte...

DESCRIPTION This is a simple-to-use PIR motion sensor with Grove compatible interface. Simply connect it to a Grove shield and program it, when any...

DESCRIPTION This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC measure...

DESCRIPTION The potentiometer twig produces analogue output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not u...

DESCRIPTION The Grove Moisture Sensor can be used to detect the moisture of soil and to judge if there is dampness around the sensor. It can be use...

DESCRIPTION The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures ac...

DESCRIPTION This slide potentiometer is a linear variable resistor with a total resistance of 10k. When you move the lever from one side to the ot...

DESCRIPTION The Beaglebone Green (BBG) is a joint effort by Beaglebone.org and Seeed Studio, it was derived from Beaglebone Black (BBB). The BBB wa...

DESCRIPTION The Grove Starter Kit for Wio LTE is a simple and cost effective choice for you to get a quick start with the Wio LTE board. Grove is o...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION The Grove - Micro Switch is an electric switch that is actuated by very little physical force, by using a micro switch, a relatively sm...

DESCRIPTION This is a general purpose LED module in Grove form factor, available in different colours.  The ingenious PCB design enables you to ben...

DESCRIPTION The Grove-Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphon...

DESCRIPTION This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, si...

DESCRIPTION What does “P” mean? “P” is for “panel mount” in this product. This Grove – Rotary Angle Sensor is a sister version of the original Grov...

DESCRIPTION The Infrared Receiver is used to receive infrared signals and remote control detection. There is an IR detector on the Infrared Receive...

DESCRIPTION 4 digit display module is usually a 12-pin module. In this Grove gadget, we utilise a TM1637 to scale down the controlling pins into 2 ...

DESCRIPTION Grove - Serial Bluetooth is an easy to use module compatible with the existing Grove Base Shield and designed for a transparent wireles...

DESCRIPTION Building an IoT project on your Raspberry Pi has never been an easy task for many developers. This is due to the messy hardware connect...

DESCRIPTION This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It's designed for ...

DESCRIPTION The Grove-Gas Sensor (O₂) tests the oxygen concentration in air, based on the principle of the electrochemical cells. It’s suitable for...

DESCRIPTION Most automated robotic projects start with a line-following robot, the Grove - Line finder v1.1 is designed to help you achieve this ta...

DESCRIPTION This Grove – Button is a sister version of the original Grove - Button. They are identical except the Grove connector has been moved to...

DESCRIPTION This Grove – Switch is a mini SPDT slide, great for “ON/OFF” situations. It’s high quality and reliable switch that Seeed adopt on many...

DESCRIPTION The Grove Inventor Kit for Micro:bit brings endless possibilities to your micro:bit. The core board in this kit is the Grove shield for...

DESCRIPTION The Grove - 2-Channel SPDT Relay has two single pole - double throw (SPDT) switches. It only requires low-voltage and low current signa...

DESCRIPTION The Grove - Vibration Sensor (SW-420) is a high sensitivity non-directional vibration sensor. When the module is stable, the circuit is...

DESCRIPTION The Grove - Optical Rotary Encoder(TCUT1600X01) is a transmissive sensor that includes an infrared emitter and two phototransistor dete...

DESCRIPTION Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNEC...

DESCRIPTION The Grove - Infrared Temperature Sensor Array (AMG8833) is a high precision infrared array sensor which is based on advanced MEMS techn...

DESCRIPTION The Grove - Coulomb Counter 3.3V to 5V (LTC2941) is based on LTC2941, its operating range is perfectly suited for single-cell Li-Ion ba...

DESCRIPTION This stick comes with 10 full-colour RGB LEDs, with only one signal pin you can control all 10 LEDs easily. All the LEDs are WS2813 Min...

DESCRIPTION The Grove - RGB LED Ring (20 - WS2813 Mini) is a mini version of WS2813 Digital RGB LED Ring. The RGB LED Ring are 3535-sized LEDs with...

DESCRIPTION The Grove - Rivet Pack (30 PCS) is used for the mounting of the Grove module. Includes: 10 x R2048 Black Plastic Rivet 10 x R2056 Bl...

DESCRIPTION This module is the combination of a breadboard and Grove PCB board. For the very first time, you can build your very own Grove module, ...

DESCRIPTION This is a red backlit 4 digit alphanumeric display, each digit consists of 14-segments. While popular 7-segment displays can only displ...

DESCRIPTION This is a red backlit 2-digit alphanumeric display, each digit consists of a 14-segment. The popular 7-segment displays can only displa...

DESCRIPTION The Grove - RGB LED Stick (15-WS2813 Mini) is a cost-effective full-colour LED stick with 15 chainable and programmable WS2813 mini LED...

DESCRIPTION The Grove - RGB LED Stick (20-WS2813 Mini) is a cost-effective full-colour LED stick with 20 chainable and programmable WS2813 mini LED...

DESCRIPTION Grove - RGB LED (WS2813 Mini) is a programmable full-colour RGB LED. It uses the same WS2813 mini component as used with the Grove - RG...

DESCRIPTION This is a unique ring - it has 24 controllable LEDs. Maybe it will drive the inspiration out of you to make a glowing magic ring! There...

DESCRIPTION The Grove - ADC for Load Cell is designed to save you time and effort by making it easy to use load cells.  The Grove - ADC for Load Ce...