Teensy 3.2

by PJRC
SKU 1775
3
£19.98 inc VAT
£16.65 ex VAT
95 in stock.

More available in 2 Weeks or more.
Available for backorder (more info)

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! The Teensy 3.2 adds a more powerful 3.3 volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3V add-on boards that require a little more power. Additionally, if it is used within the Teensy 3.1 limits of operation, the Teensy 3.2 and 3.1 are interchangeable!

Note: The Teensy 3.2 does not come with a USB cable.

  • Dimensions: 1.4 x 0.7" (~35 x 18 mm)

  • 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
  • 256K Flash Memory, 64K RAM, 2K EEPROM
  • 21 High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
  • 34 Digital I/O Pins (5V tolerance on Digital Inputs)
  • 12 PWM outputs
  • 7 Timers for intervals/delays, separate from PWM
  • USB with dedicated DMA memory transfers
  • 3 UARTs (serial ports)
  • SPI, I2C, I2S,CAN Bus, IR modulator
  • I2S (for high quality audio interface)
  • Real Time Clock (with user-added 32.768 crystal and battery)
  • 16 DMA channels (separate from USB)
  • Touch Sensor Inputs

Customer Reviews

5 Based on 3 Reviews
5 ★
100% 
3
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

  • order
  • best
  • products
  • Arduino
  • range
  • features
  • expectation
  • Teensy 3.2
  • friend
  • PJRC Audio Shield
PH
07/16/2019
Philip H.
United Kingdom United Kingdom

It really is 'teensy' but oh so powerful!

I'm still getting to know my new friend the Teensy 3.2 but it's a very impressively powerful little Arduino-alternative. I got the Teensyduino add-on for the Arduino IDE installed and running with no problems and the test sketch uploaded as expected - it just works! I also have bought the PJRC Audio Shield and have it soldered to the Teensy and it's working too. So far I've been trying it out as a synth (See 'Notes and Volts' Teensy Synth on YouTube) but my plan is to develop it into a guitar effects pedal using the Teensy Audio Library and the DSP features.

MC
04/01/2019
Michael C.
United Kingdom

Teensy 3.2 delivery

Very good. The order was delivered the morning after I placed the order which was a day ahead of my expectation! They also have a good range of Arduino products probably the best I've seen in the UK.

NC
10/09/2018
Nikola C.
United Kingdom

Teesny 3.2

A great product! Fast, easy to use, does what it says on the sticker! Cheers! Niko