Displays

DESCRIPTION This is a 1 meter long flexible strip of 60 individually controllable RGB Leds. Each 1 meter strip can be cut into sections and still ...

DESCRIPTION In 2011 the original Gameduino brought vintage gaming to the Arduino. In 2013 Gameduino 2 set a new standard in hand-held open-source ...

DESCRIPTION You can now create a dazzling display with your Raspberry Pi with the Adafruit RGB Matrix Bonnet. These boards plug into your Pi and m...

DESCRIPTION Round and round and round they go! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.6" (66mm) outer diameter. The r...

DESCRIPTION The Grove - LCD RGB Backlight display was so well received that Seeed has now released a cheaper monochrome backlit board to the Grove...

DESCRIPTION The 7" Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotai...

DESCRIPTION This is a 1 meter long flexible strip of 144 individually controllable RGB LEDs that are fully NeoPixel compatible. Each 1 meter strip...

DESCRIPTION Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The r...

DESCRIPTION HyperPixel 4.0 - Hi-Res Display for Raspberry Pi, it's a high-speed 4.0" TFT display for your Raspberry Pi! The HyperPixel 4.0 is the ...

DESCRIPTION Perfect for the Raspberry Pi, this beautiful thin film transistor 8" HDMI display has a resolution of 800px x 600px producing a super ...

DESCRIPTION Add some sizzle to your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection and a ...

DESCRIPTION This adaptor board connects Teensy 3.2 to thousands of LEDs using the OctoWS2811 Library. The adaptor features a 74HCT245 buffer chip ...

DESCRIPTIONThe biggest NeoPixel Ring yet! With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a ci...

DESCRIPTION Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is really big (3.2" diagonal) bright (6 whit...

DESCRIPTION This is the FadeCandy, a USB controlled LED driver with on-board dithering to help illuminate your Neopixel project. Even though the F...

DESCRIPTION The SparkFun Large Digit Driver is a chain-able controller backpack that can be soldered directly to the back of our large 6.5" 7-segm...

DESCRIPTION The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The disp...

DESCRIPTION This little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire...

DESCRIPTION This little display is only 1.5" diagonal but has a high density 220 ppi, 240x240 pixel display with full-angle viewing. It looks a lo...

DESCRIPTION Create some Times Square razzle dazzle with this sweet, ultra-high-density 64x64 RGB LED Matrix. These panels are typically used to ma...

DESCRIPTIONA Liquid Crystal Light Valve (LCLV) is a device that uses the properties of liquid crystals to control the level of illumination passing...

DESCRIPTION Are you done with a tedious mono colour backlight? This Grove module enables you to set the colour to whatever you like via the simple...

DESCRIPTION This little display breakout is the best way to add a small, colourful and bright display to any project. Since the display uses 4-wir...

DESCRIPTION The Monochrome 128x32 SPI OLED has a crisp, high contrast display making it very readable even for its small size. This display is mad...

DESCRIPTION 16x2 Positive Transflective LED Edge Backlit LCD Module. The display itself is driven by the industry standard Samsung KS0066 chip, an...

DESCRIPTION The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED ...

DESCRIPTION The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on ...

DESCRIPTION 4 digit display module is usually a 12 pin module. In this Grove gadget, we utilise a TM1637 to scale down the controlling pins into 2 ...

DESCRIPTION Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is ...

DESCRIPTION The Grove - OLED Display 1.12'' V2 is a little elegant screen that can add a screen interaction feature to your Arduino. With the onboa...

DESCRIPTION This is a high-resolution, ultra-wide viewing angle ISP HDMI display. Specifically, this display has a resolution of 1280 x 720 and a ...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page r...

DESCRIPTION A handy lil' LCD to add readouts to your projects. This 0.96" SPI LCD has a 2:1 widescreen aspect ratio, has great viewing angles (IPS...

DESCRIPTION The Qwiic Micro OLED Breakout is a Qwiic-enabled version of the popular Micro OLED display! The small monochrome, blue-on-black OLED sc...

DESCRIPTION Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This cu...