translation missing: en.general.accessibility.skip_to_content

Maker Nano: Simplifying Arduino for Projects

SKU 4106
2 reviews
£7.00 inc VAT
£5.83 ex VAT
30 in stock.

If you love the Maker UNO but find that it's too big to fit into your project? Worry not! Introducing Maker Nano, an Arduino board specially crafted for building projects while maintaining all the useful features of the Maker UNO.

Wiring up your own circuits can be one of the most tedious parts of learning electronics. It's very prone to error and sometimes, not reversible. With the help of 12 x LEDs, 1 x programmable push button and 1 x piezo buzzer, you can start coding and have some fun experimenting with Maker Nano right out of the box without the hassle of wiring up any circuits. As you learn and start building projects, the LEDs for each digital I/O pin will also come in handy for circuit troubleshooting.

Compatible with Arduino Nano

Just slightly bigger than the original Arduino Nano (1mm longer and 3mm wider) and maintaining the same pin arrangement, Maker Nano is compatible with most, if not all, of the daughter boards for Arduino Nano in the market. Not to forget it's also breadboard friendly. The smaller form factor compared with Arduino UNO makes this a better choice not only for learning purposes but also for building projects and having fun with experiments, especially when you need to fit the board into the tiniest space possible. Unlike its bigger brother Maker UNO, Maker Nano comes with a 5V regulator which means you can power up your circuit from a battery or DC adapter, besides the USB port.

Features Arduino Nano 3.X Maker Nano
Microcontroller ATmega328P ATmega328P
Programming IDE Arduino IDE Arduino IDE
Operating Voltage 5V 5V
Digital I/O Pins 20 20
PWM 6 6
Analog Input 8 (10-bit) 8 (10-bit)
UART 1 1
SPI 1 1
I2C 1 1
External Interrupt 2 2
Flash Memory 32KB 32KB
SRAM 2KB 2KB
EEPROM/Data Flash 1KB 1KB
Clock Speed 16MHz 16MHz
Power Supply Vin or USB Vin or USB
Vin Voltage 7 - 12V 7 - 30V
USB to Serial Chip FTDI FT232RL CH340C
Programmable LED 1x at Pin D13 12x at Pin D2-D13
Programmable Push Button No 1x at Pin D2
Piezo Button No 1x at Pin D8
Dimensions 18 x 45mm 21 x 26mm
Maker Nano Datasheet
Maker Nano Pinout Diagram
Maker Nano Schematic v1.0.0

CH34X Driver - Please note: Ensure that Maker Nano is connected to the computer's USB port during driver installation.