STEMMA QT/Qwiic Sensors

DESCRIPTION Do you want to connect multiple Grove, Qwiic, and STEMMA QT modules to your development boards using a single cable? It's easy with the...

DESCRIPTION For fans of the TMP36, Adafruit now have a very similar analog temperature sensor with a 3-pin JST connector. Unlike many of their temp...

DESCRIPTION Measuring voltage and adjusting it is what electronics is all about so you won’t get far without friends like the Adafruit PCF8591 Qua...

DESCRIPTION Potentiometers are the perfect tool when you want to change your circuit by turning a knob. Turns out, there are times when you want t...

DESCRIPTION This adorable little board will come in very handy whenever you need a good amount of 5V power. It's the size of a linear regulator, bu...

DESCRIPTION Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some tha...

DESCRIPTION The LIS331HH is capable of measuring ±6g/±12g/±24g on each of its three axis! Compare that with most other accelerometers such as the L...

DESCRIPTION The AHT20 is a nice but inexpensive temperature and humidity sensor. You can take sensor readings as often as you like, and it uses st...

DESCRIPTION This absolute pressure sensor, ST LPS22HB (a.k.a LPS22) can quickly and easily measure this air pressure, useful when you want to know...

DESCRIPTION The LIS331HH is capable of measuring up to ±24g on each of its three axis! Should that not be enough for you the H3LIS331 will certain...

DESCRIPTION If you've ever ordered and wired up a 9-DOF sensor, chances are you've also realised the challenge of turning the sensor data from an ...

DESCRIPTION Add motion, direction and orientation sensing to your project with this all-in-one 9-DOF sensor that is STEMMA QT ready for easy plug-...

DESCRIPTION Different from the Grove system the Qwiic connection system is an I2C interface system createdby Sparkfun. It uses a 4pin JST SH 1.0mm...

DESCRIPTION Most accelerometers have a similar range of measurements that they can make: often around 2G - 16G. Similarly, most gyros can measure ...

DESCRIPTION Within its little package, the MCP4728 has four 12-bit DACs for whatever voltage setting needs you may have. In addition, it has the a...

DESCRIPTION This DPS310 sensor is a high precision barometric sensor, perfect for measuring altitude changes with up to ±0.002 hPa (or ±0.02 m) in...

DESCRIPTION For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JS...

DESCRIPTION Wouldn't it be cool to drive a tiny OLED display, read a colour sensor, or even just flash some LEDs directly from your computer? Sure...

DESCRIPTION Behold, the ST ISM330DHCX: an industrial quality Accelerometer+Gyroscope 6-DOF IMUs (inertial measurement unit). This IMU sensor has 6...

DESCRIPTION The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem ...

DESCRIPTION Sometimes you need to sense pressure in a damp or caustic environment. And sometimes you need to know the relative changes in pressure...

DESCRIPTION Wouldn't it be cool to drive a tiny OLED display, read a colour sensor, or even just flash some LEDs directly from your computer?  Sur...

DESCRIPTION If you're looking for the most compact colour display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing...

DESCRIPTION Add motion and orientation sensing to your Arduino project with this affordable 6 Degree of Freedom (6-DoF) sensor with sensors from S...