Newest Products

DESCRIPTION This Adafruit ESP32-S2 Feather with native USB and 4 MB flash + 2 MB of PSRAM, this board is perfect for use with CircuitPython or Ardu...

DESCRIPTION The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single pack...

DESCRIPTION The SparkFun Qwiic Mini ToF Imager is a state of the art, 64-pixel Time-of-Flight (ToF) four-meter ranging sensor built around the VL5...

DESCRIPTION The SparkFun Qwiic ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor built around the VL53L5CX fro...

DESCRIPTION From digital alarm clocks to microwaves, seven-segment displays are used across a load of different electronic devices these days. Spa...

DESCRIPTION This SparkFun Qwiic Digital Temperature Sensor Breakout provides a combination of high-temperature accuracy with excellent low power co...

DESCRIPTION The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full colour LED control using I2C. Write to in...

DESCRIPTION The SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house. The SGP40 is based on Se...

DESCRIPTION This plug-and-play PCB is designed to slip into any USB A port on a computer or laptop. There's an RP2040 microcontroller on board with...

DESCRIPTION The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development pla...

DESCRIPTION The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development pla...

DESCRIPTION SparkFun has teamed up with CircuitDojo to bring you the SparkFun nRF9160 Thing Plus, featuring the powerful Nordic nRF9160 microcontro...

DESCRIPTION The SparkFun ATECC608A Cryptographic Co-processor Breakout allows you to add strong security to your IoT node, edge device, or embedded...

DESCRIPTION The SparkFun QwiicBus MidPoint works in tandem with the QwiicBus Endpoint so you can extend the range of your I2C bus and easily tap i...

DESCRIPTION Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPo...

DESCRIPTION The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’...

DESCRIPTION The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP). Thanks to the NM...

DESCRIPTION Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board...

DESCRIPTION This Teensy Adapter makes it easier than ever to use Qwiic compatible products with your favourite Teensy microcontroller. This adapter...

DESCRIPTION This Teensy Adapter makes it easier than ever to use Grove and Qwiic compatible products with your favourite Teensy microcontroller. Th...

DESCRIPTION The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to +-4g. This br...

DESCRIPTION The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcont...

DESCRIPTION Using this board is easy: connect it to your I2C bus at the beginning of the chain (if you don't have a massively long cable, you can a...

DESCRIPTION The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thin...

DESCRIPTION The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on ...

DESCRIPTION The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost-effective solution for adding a 16x2 RGB on Bl...

DESCRIPTION This lovely sensor has ± 3% relative humidity measurements with a range of 0–80% RH, and ±0.4 °C temperature accuracy at a range of -1...

DESCRIPTION The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on ...

DESCRIPTION This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can reprogram it over I2C. The tag show...

DESCRIPTION This is the BH1750 16-bit Ambient Light Sensor from Rohm. Because of how important it is to humans and most other living things, sensi...

DESCRIPTION The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor....

DESCRIPTION Do you want to connect multiple Grove, Qwiic, and STEMMA QT modules to your development boards using a single cable? It's easy with the...

DESCRIPTION Measuring voltage and adjusting it is what electronics is all about so you won’t get far without friends like the Adafruit PCF8591 Qua...

DESCRIPTION Potentiometers are the perfect tool when you want to change your circuit by turning a knob. Turns out, there are times when you want t...

DESCRIPTION Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some tha...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring...