Raspberry Pi Accessories and Breakout Boards

DESCRIPTION The I2CDriver is an easy-to-use, open source tool for controlling I2C devices. It works with Windows, Mac, and Linux, and has a built-...

DESCRIPTION This is the official 2.5Amp 5.1V power supply for Raspberry Pi 3 model B/B+. The latest version of the Raspberry Pi cannot be powered ...

DESCRIPTION As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it was self-powered and p...

DESCRIPTION SPIDriver is an easy-to-use tool for controlling SPI devices. It works with Windows, Mac, and Linux, and has a built-in colour screen ...

DESCRIPTION The 7" Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotai...

DESCRIPTION The Raspberry Pi Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor. It is a custom designed add-on board for Ras...

DESCRIPTION This 16GB Class 10 Micro SD Memory Card is designed to meet the storage demands of high quality and large-volume digital still and vide...

DESCRIPTION This 30cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface). ...

DESCRIPTION The SparkFun Differential I2C Breakout is the fastest and easiest way to extend the range of your I2C communication bus. The breakou...

DESCRIPTION The micro:bit Breadboard Adapter is a breadboard pinboard based on the BBC micro:bit. It plugs directly into the breadboard and breaks...

DESCRIPTION 16GB Class 10 Micro SD Memory Card comes with an adapter for use in SD card slots and is designed to meet the storage demands of high q...

DESCRIPTION Perfect for the Raspberry Pi, this beautiful thin film transistor 8" HDMI display has a resolution of 800px x 600px producing a super ...

DESCRIPTION The PIxy2 pan-tilt makes a great “hello world” application for Pixy2.  It’s easy to assemble and it gives your Pixy2 something to do: ...

DESCRIPTION Most of the MCUs use TTL levels, and the computer serial port generally uses 232 levels. If we want the computer to communicate with t...

DESCRIPTION This 100cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).

DESCRIPTION The Bright Pi is a breakout/add on board for the Raspberry Pi which can also be used with other I2C devices like Arduino. It adds both...

DESCRIPTION The 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller w...

DESCRIPTION The I2C Encoder V2 is a small board where you can use a classical mechanical encoder or an illuminated RGB encoder on I2C bus. The dev...

DESCRIPTION This 32GB Class 10 Micro SD Memory Card is designed to meet the storage demands of high quality and large-volume digital still and vide...

DESCRIPTION A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a su...

DESCRIPTION This simple little kit takes moments to solder but will make your bread-boarding life a whole lot easier for years to come. Breaking ou...

DESCRIPTION This 50cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).

DESCRIPTION The infra-red camera module v2 (Pi NoIR) replaced the original PiNoIR camera in April 2016. The v2 camera has a Sony IMX219 8-megapixe...

DESCRIPTION This is a small WiFi dongle, with a large antenna, that can add wireless capabilities to your projects through a USB port. Note: For u...

DESCRIPTION This simple little kit takes moments to solder but will make your bread-boarding life a whole lot easier for years to come. Breaking ou...

DESCRIPTION This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and ge...

DESCRIPTION The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboar...

DESCRIPTION  This Micro SD card adaptor allows you to easily use gigabytes of flash memory with Teensy. It can also be used on a breadboard, or wi...

DESCRIPTION An ultra-low-power ( ~100 nA), highly accurate real-time clock breakout. The RV3028 RTC breakout is perfect for adding timekeeping to ...

DESCRIPTION This kit allows you to interface with your vehicle's OBD-II interface. The kit includes a Serial CAN-BUS module as well as an OBD-II C...

DESCRIPTION This is a basic 12 button keypad that has been designed for easy user input and functionality. The buttons are set up in a matrix form...

DESCRIPTION This is an 16GB class 10 microSD card that comes with a pre installed with NOOBS operating system and an adapter for SD card slot. ...

DESCRIPTION The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potentially ha...

DESCRIPTION The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting i...

DESCRIPTION This Kingston 64GB Class 10 Micro SD Memory Card is designed to meet the storage demands of high quality and large-volume digital still...

DESCRIPTION The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi that brings the Pi Supply Switch technology together w...

DESCRIPTION This 80cm cable is the easiest way ever to connect to your Raspberry Pi or microcontroller. Inside the USB plug is a USB to Serial conv...

DESCRIPTION This 200cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).

DESCRIPTION One can never have enough socks or USB ports. Add some more USB capability to your Raspberry Pi Zero, or any other single-board comput...

DESCRIPTION Ring:bit V2 is a simple module for use with the micro:bit. It breaks out 3 IO connectors, power connectors, ground connectors on the mi...

DESCRIPTION You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2 or 3 with the RGB Matrix HAT. This HAT plugs into your P...

DESCRIPTION Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the sam...

DESCRIPTION The PiTFT Plus capacitive touchscreen display for the Raspberry Pi features a 2.8" display with 320x240 16-bit color pixels and a capa...

DESCRIPTION This 15cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).

DESCRIPTION The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins with orientation, pressure, humidity and temper...

DESCRIPTION The Raspberry Pi Relay Board v1.0 is a shield that controls the load of high current, providing a solution for controlling devices not...

DESCRIPTION Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9600 does all that fo...

DESCRIPTION The Grove RS-485 allows your Arduino connect with an RS-485 device easily, you just need to plug and play. RS485 is a cost-effective s...