Translation missing: en.general.accessibility.skip_to_content
Tic T825 Usb Multi-Interface Stepper Motor Controller - Motion Controllers

Tic T825 USB Multi-Interface Stepper Motor Controller

by Pololu
SKU 2194
£50.99 inc VAT
£42.49 ex VAT
1 in stock.

The Tic T825 USB multi-interface stepper motor controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analogue voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8825 driver and male headers and terminal blocks are included but not soldered. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).

The stepper motor controller is a versatile, general-purpose controller designed to control one bipolar stepper motor. With a variety of supported interfaces–USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analogue voltages for use with a potentiometer or analogue joystick, and quadrature encoder for use with a rotary encoder dial–and a wide array of configurable settings, the Tic T825 makes it easy to add basic control of a bipolar stepper motor to a variety of projects. A free configuration utility (for Windows, Linux, and macOS) simplifies the initial setup of the device and allows for in-system testing and monitoring of the controller via USB.

The Tic T825 is based on the DRV8825 IC from Texas Instruments. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (the absolute maximum is 2.5 A per phase). It has reverse protection for motor power supplies up to 40 V.

Please Note:

  • This version is sold unassembled so soldering is necessary to use it.
  • Size: 1.50" × 1.05" × 0.42"
  • Weight: 5.1 g
  • Motor driver: DRV8825
  • Control interface: USB; non-inverted TTL serial; I²C;
  • RC servo pulses; analogue voltage; quadrature encoder
  • Minimum operating voltage: 8.5 V
  • Maximum operating voltage: 45 V (Reverse voltage protection only works up to 40 V)
  • Continuous current per phase: 1.5 A (Without a heat sink or forced airflow)
  • Maximum current per phase: 2.5 A (With sufficient additional cooling)
  • Maximum step rate: 50000 PPS
  • Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
  • Reverse voltage protection: To -40 V. Connecting supplies over 40 V in reverse can damage the device