SparkFun

DESCRIPTION The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface €“ that means with just two wires, your microcontroller ca...

DESCRIPTION The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board com...

DESCRIPTION This is a breakout board for the very handy 16-Channel Analogue/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rota...

DESCRIPTION The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform...

DESCRIPTION We all know the BeagleBone Black is pretty great, but wouldn't it be nice to create personal capes based on your needs? The BeagleBone...

DESCRIPTION This is the RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The on...

DESCRIPTION Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC! VC...

DESCRIPTION You've always wanted to output analogue voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 i...

DESCRIPTION Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD ...

DESCRIPTION With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to brea...

DESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the...

DESCRIPTION This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standa...

DESCRIPTION This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are solder...

DESCRIPTION Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock...

DESCRIPTION This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harv...

DESCRIPTION This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with off...

DESCRIPTION This is a more universal GPS breakout board that uses a vertical SMD connector for any of the EM401 or EM406 GPS module cables that we...

DESCRIPTION The XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to the Qwiic Connect System. Equipped with the X...

DESCRIPTION The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readi...

DESCRIPTION The LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarka...

DESCRIPTION The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potentially ha...

DESCRIPTION If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The bi-directional logic level conv...

DESCRIPTION The NCP1400 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batterie...

DESCRIPTION This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a hig...

DESCRIPTION This is a breakout board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different ...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wirin...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wirin...

DESCRIPTION The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturises them, addin...

DESCRIPTION This is the Real Time Clock (RTC) Module, this little breakout uses the DS1307 to keep track of the current year, month, day as well ...

DESCRIPTION This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" head...

DESCRIPTION This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB...

DESCRIPTION The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL...

DESCRIPTION This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340C and takes advantage of the handy USB-C...

DESCRIPTION The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V ...

DESCRIPTION This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If ...

DESCRIPTION The SN74HC165N is a neat little IC that will take an input of up to 8 parallel lines and produce a single, serial output. It's a great...