SparkFun

DESCRIPTIONThis is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a...

DESCRIPTION Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated v...

DESCRIPTION This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two row...

DESCRIPTION Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and an...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTIONStandard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small sp...

DESCRIPTIONStandard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small s...

DESCRIPTION This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables have bare wires ...

DESCRIPTION This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable monitor ...

DESCRIPTION Once you've hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on your car's ...

DESCRIPTION This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but ...

DESCRIPTION This is a 200mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be...

DESCRIPTION This is a 500mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be...

DESCRIPTION This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but c...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail ...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the othe...

DESCRIPTION The SparkFun Qwiic system is expanding greatly. But we understand there are other systems out there. The Qwiic to Grove cable allows in...

DESCRIPTION The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi ...

DESCRIPTION It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can...

DESCRIPTION Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART’s mysterious baud rate? Or do you want to reverse engin...

DESCRIPTION USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host ...