translation missing: en.general.accessibility.skip_to_content
Please Note: Backordered items may experience extended lead times due to COVID-19, click for more information.
Backordered items may experience extended lead times due to COVID-19.

Argon - IoT Development Board (Wi-Fi + Mesh + Bluetooth)

SKU 2972
£26.99 inc VAT
£22.49 ex VAT
Sorry, this product is out of stock.

More available in 5-7 days.
Available for backorder (more info)

The Argon is a powerful Wi-Fi enabled development board that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.

The Argon is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints.

All Particle Hardware is designed from the ground up to work with the Device Cloud; a powerful set of tools and infrastructure to build, connect and manage your IoT fleet.

Includes:

  • Argon dev board
  • 2.4GHz flex antenna

Specs:

  • Espressif ESP32-D0WD 2.4G Wi-Fi coprocessor 
    • Onboard 4MB flash for ESP32 
    • 802.11 b/g/n support 
    • 802.11 n (2.4 GHz), up to 150 Mbps
  • Nordic Semiconductor nRF52840 SoC 
    • ARM Cortex-M4F 32-bit processor @ 64MHz 
    • 1MB flash, 256KB RAM 
    • IEEE 802.15.4-2006: 250 Kbps 
    • Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps 
    • Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations 
    • ARM TrustZone CryptoCell-310 Cryptographic and security module 
    • Up to +8 dBm TX power (down to -20 dBm in 4 dB steps) 
    • NFC-A tag
  • On-board additional 2MB SPI flash
  • 20 mixed signal GPIO (6 x Analog, 8 x PWM), UART, I2C, SPI
  • Micro USB 2.0 full speed (12 Mbps)
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • On-board 2.4GHz PCB antenna for Thread/BLE (does not support Wi-Fi)
  • Two U.FL connectors for external antennas (one for Thread/BLE, another for Wi-Fi)
  • Meets the Feather specification in dimensions and pinout
  • FCC, CE, and IC certified
  • RoHS compliant (lead-free)