translation missing: en.general.accessibility.skip_to_content

Boron 2G/3G Kit - IoT Development Kit (Cellular + Mesh + Bluetooth)

SKU 2973
Sold out
£73.00 inc VAT
£60.83 ex VAT

The Boron GSM is a powerful 2G/3G enabled development kit that can act as either a standalone cellular endpoint or 2G/3G enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.

The Boron is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints where Wi-Fi is missing or unreliable.

All Particle hardware is designed from the ground up to work with the Device Cloud; a powerful set of tools and infrastructure to build, connect and manage your IoT fleet.

Contents:

  • Boron 2G/3G dev board
  • Mini breadboard
  • Cellular flex antenna
  • 1800mAh Li-Po battery
  • USB cable
  • Starter project includes two resistors (220 ohm), one red LED, and one photodiode

Specs:

  • u-blox SARA U201 2G/3G modem 
    • HSPA/GSMqq with global hardware and SIM support 
    • 3GPP Release 7 
    • Bands 800/850/900/1900/2100 MHz
  • Nordic Semiconductor nRF52840 SoC 
    • ARM Cortex-M4F 32-bit processor @ 64MHz 
    • 1MB flash, 256KB RAM 
    • IEEE 802.15.4-2006: 250 Kbps 
    • Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps 
    • Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations 
    • ARM TrustZone CryptoCell-310 Cryptographic and security module 
    • Up to +8 dBm TX power (down to -20 dBm in 4 dB steps) 
    • NFC-A tag
  • On-board additional 2MB SPI flash
  • 20 mixed signal GPIO (6 x Analogue, 8 x PWM), UART, I2C, SPI
  • Micro USB 2.0 full speed (12 Mbps)
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • Dual SIM support: Nano 4FF and MFF2
  • U.FL connector for external antenna
  • Meets the Feather specification in dimensions and pinout
  • FCC and PTCRB certified
  • RoHS compliant (lead-free)

Customer Reviews

Based on 0 reviews
5 Star
0% 
0
4 Star
0% 
0
3 Star
0% 
0
2 Star
0% 
0
1 Star
0% 
0
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!