translation missing: en.general.accessibility.skip_to_content

Grove - 4 Channel 16-bit ADC (ADS1115) w/ Programmable Amplifier Gain

SKU 3690
Sold out
£7.38 inc VAT
£6.15 ex VAT

The Grove - 4 Channel 16-bit ADC (ADS1115) is a 4-channel 16-bit high-resolution, low-power ADC chip with PGA (programmable gain amplifier) function. The PGA allows it to measure input voltages from ±256 mV to ±6.144 V, thus greatly expanding its application scenarios.

With Raspberry Pi being ADC-free and its I/O only being able handle digital signals, when analog sensors are involved, an external ADC module is needed to convert the analog signal to digital. On the other hand, most Arduinos come with a 10-bit ADC, which is not very accurate, and the resolution is affected by the reference voltage, so it is not suitable for some applications where high accuracy is required and the operating voltage range is wide. The Grove ADS1115 solves these problems perfectly. The ADS1115 is a 4-channel 16-bit high-resolution, low-power ADC chip with PGA (programmable gain amplifier) function. The PGA allows it to measure input voltages from ±256 mV to ±6.144 V, thus greatly expanding its application scenarios.

At the same time, the ADS1115 has an input multiplexer (MUX) that allows two-channel differential-input measurements or four-channel single-ended input measurements. Therefore, it is possible to measure the value of 4 analog sensors as well as to use the differential measurement for battery voltage detection. The chip has a continuous measurement mode and a single measurement mode, and the standby power consumption in the single measurement mode is extremely low, making it ideal for IoT applications.For communication, the module uses I2C communication with four optional I2C addresses, allowing for multi-chip cascading for more complex scenarios. With the Grove connector, you can connect Grove - ADS1115 with your Raspberry Pi and Arduino easily.

Typical applications include

  • Analog-to-Digital Converter
  • Portable Instruments
  • Battery Monitoring
  • Factory Automation and Process Controls
  • Supply range: 2.0V ~ 5.5V, supporting 3.3V and 5V systems
  • 16-bit Figh Resolution ADC
  • Programmable Data Rate: 8 SPS to 860 SPS
  • Internal Programmable Gain: x16 with internal flow-drift voltage reference and oscillator
  • Built-in PGA is Gain-Adjustable and can be Controlled by Software
  • 4 Single-Ended Inputs or 2 Differential Inputs