LED Side Light Strip - White - 144 LED - 1m (Adafruit NeoPixel compatible)
£26.66 ex VAT
These LED strips are the perfect lights for anyone that's looking to add vibrant, glowing light at a 90 degrees angle into their life! They're super slim and flexible measuring only 10mm in width, this LED strip is ideal for use in accent lighting, back lighting, edge lighting and much more!
This LED strip uses an SK6812 driver chip which is based on the WS2812 chip that most NeoPixel products use. This means that this LED strip will work perfectly with Adafruits NeoPixel library so you'll be up glowing and programming lighting patterns in no time!
This is the 144 LED-per-meter version of the Side Light strip. We also offer a 60 and 90 LEDs per meter version of this LED strip.
The strip is constructed of flexible white PCB material with weatherproof sheathing. You can cut this stuff pretty easily with wire cutters. There is a cut line halfway down the strip. Solder to the 0.1" copper pads, and you're good to go! Of course, you can also connect strips together to make them longer, just watch how much current you need!
These strips come in 1-meter reels with a 2-pin JST SM connector on each end. To wire up these strips we suggest picking up some JST SM plugs. For the power wires, you will also probably want a 2.1mm DC jack to wire in, so you can connect a 5V wall adaptors to power it.
- LED Position: 90 degree angle on strip
- Beam Angle: 120 degrees
- Emitting Colour: Full colour
- Operating Voltage: 5V DC
- V+: Red
- GND: Black
- DATA: Blue
- Power(W): 25 +- 1W per 1m
- IC Control: SK6812