translation missing: en.general.accessibility.skip_to_content

LPCXpresso Base Board

SKU 475
Sold out
£106.80 inc VAT
£89.00 ex VAT

Direct from the snowy shores of Sweden, the LPCXpresso Base board provides the ideal platform to get started QUICKLY with LPC processor experiments and prototyping. The Base board can also be used together with the following:

  • Socket for LPCXpresso and mbed module
  • 50 pin expansion dual row pin list connector (male, 100mil pitch) for simple connection external designs and to a logic analyzer
  • 50 pin expansion dual row header connector (female, 100mil pitch) for simple connection to breadboard
  • Battery powering (small coin battery)
  • USB interface
  • Reset pushbutton

Digital IO:

  • RGB-LED (can be PWM controlled)
  • 5-key joystick switch
  • 2 pushbuttons, one for activating bootloader
  • Rotary switch with quadrature encoding (timer capture)
  • Temperature sensor with PWM output (timer capture)

Analog IO:

  • Trimming potentiometer input (analog input)
  • PWM to analog LP-filtering (PWM output and analog input)
  • Speaker output (PWM output)
  • Oscilloscope probe inout stage

Serial bus - SPI:

  • Shift register driving 7-segment LED
  • SD/MMC memory card interface
  • Dataflash SPI-NOR flash

Serial bus - I2C:

  • PCA9532 port expander connected to 16 LEDs
  • 8kbit E2PROM
  • MMA7455L accelerometer with I2C interface
  • Light sensor

Serial bus - I2C/SPI shared:

  • SC16IS752 - I2C/SPI to 2xUART bridge; connected to RS232 full-modem interface and one expansion UART
  • 96x64 pixel white OLED (alternative I2C/SPI interface)

Serial bus - UART:

  • USB-to-serial bridge, with automatic ISP activation
  • RS422/485 interface
  • Interface socket for XBee RF-module

Specific mbed module support:

  • CAN bus interface (can be simulated with LPCXpresso)
  • Ethernet RJ45 connector with integrated magnetic

Dimensions: 150 x 180 mm

Power: via USB (+5V)

The following resources are available for download either directly below or from our support site after registration of the LPCXpresso Base Board.



Sample Software Disclaimer

Project files exist for Code Red's LPCXpresso/Red Suite Software Development toolkits.

  • Android Open Accessory (AOA) Demo using NXP's USB library.
  • MCU Drivers
    • ADC
    • Clock Config
    • GPIO
    • I2C
    • SSP (SPI)
    • Timer16, Timer32
    • UART
  • Base Board Peripheral Drivers
    • Accelerometer
    • I2C-EEPROM
    • SPI-Flash
    • 5-key Joystick
    • 7-segment Display
    • Light Sensor
    • OLED Display, including simple Graphics Library
    • PCA9532 (LEDs)
    • RGB LED
    • Rotary Switch
    • Temperature Sensor
    • UART2 (I2C/SPI to UART, SC16IS752)
    • FAT File System for MMC/SD card (ChaN Fat FS Module)
  • Sample Applications
    • Rotary switch controls 7-segment display
    • Reading and writing to EEPROM
    • Joystick controlling LEDs (PCA9532)
    • Listing content on a FAT formatted MMC/SD card
    • Values from light sensor, temperature sensor, accelerometer and trim potentiometer are written to the OLED display
    • Joystick controlling RGB LED
    • Speaker - Playing tones
    • Speaker - Playing WAV file
    • Reading and writing to SPI-Flash
    • Reading from UART1 and writing to UART2 (and vice versa)
    • Trying to contact an XBee module. Result printed on OLED display
    • Values from the BNC is written to the OLED display
    • NXP's USB Mass Storage Device example (LPC1343 and LPC1769)
    • NXP's ROM based SB Mass Storage Device example (LPC1343)
    • NXP's USB HID example (LPC1343)
    • NXP's ROM based USB HID example (LPC1343)
    • NXP's USBHostLite (LPC1769)