TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch (ID: 2219)
£27.26 ex VAT
This TFP401 HDMI/DVI Decoder to 40-Pin TTL breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch screen driver. You can use this board as an all-in-one display driver for TTL displays, or decoding HDMI/DVI video for some other project.
The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit colour pixel data - HDCP not supported! It will decode any resolution from 25-165MHz pixel clock, basically up to 1080p. It has supporting circuitry like a backlight driver and is configured for running basic TTL display panels.
You can power the display and decoder from a USB port. For example, with a 5" 800x480 display and 50mA backlight current, the current draw is 500mA total. You can reduce that down 370mA by running the backlight at half-brightness (25mA). With the backlight off, the decoder and display itself draw 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desired.
It can be paired with a screen that has a resistive touch overlay. The USB port then acts as both power and data, with the touch screen appearing like a USB mouse. It has been tested successfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work.
This driver is designed specifically as a small and easy to use display driver for our 40-pin TTL displays. In particular, we suggest it for use with single board computers (or desktop/laptops!) with DVI/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB and then feed it video via the HDMI port. It's a very small board so great for tucking into an enclosure. It can drive our 4.3", 5.0" or 7.0" displays, the 5" or 7" 800x480 displays are recommended as some computers do not like the low resolution of the 4.3" and the TFP401 does not contain a video scaler, it will not resize/shrink video!
This board comes with an 800x480 resolution EDID so it will be auto-detected at that resolution. For advanced users, the EDID can be reprogrammed using example Arduino code. Or, for computers that use Linux, you can always just force the resolution to whatever display you have connected.
Note: This is just a decoder breakout, a display is not included!
- Dimensions : 51mm x 68mm x 8.5mm / 2" x 2.7" x 0.3"
- Weight: 18.7g