Translation missing: en.general.accessibility.skip_to_content

Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller

by Pololu
SKU 3391
1 review
Sold out
£79.07 inc VAT
£65.89 ex VAT

The Tic 36v4 High-Power Stepper Motor Controller uses discrete MOSFET H-bridges, allowing it to control large stepper motors that demand more current than a typical integrated driver can handle, but it matches the compact form factor of our lower-power Tic controllers. It supports nine microstepping modes with as small as 1/256-step resolution, as well as various current decay modes, including an automatic mixed decay mode. The Tic 36v4 can operate from 8 V to 50 V and can deliver up to approximately 4 A continuous per phase without a heat sink or forced air flow (6 A max with sufficient additional cooling).

  •  Motor Driver: Discrete MOSFETs
  • Control Interface: USB, non-inverted TTL serial, I2C,  RC servo pulses, analogue voltage, quadrature encoder
  • Minimum Operating Voltage: 8V
  • Maximum Operating Voltage: 50V
  • Continuous Current per Phase: 4A
  • Maximum Current per Phase: 6A
  • Maximum Step Rate: 50000 PPS
  • Microstep Resolutions: Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 and 1/256
  • Reverse Voltage Protection: Yes
  • Size: 1.5" x 1.05" x 0.42"