Filters
Prototyping Grove
Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your ideas.
The Grove platform has been designed to fit many of the main microcontroller boards as a shield, for example there are Grove starter kits for Arduino, Photon and Raspberry Pi that convert the boards for use with the Grove system of connectors.
-
Grove 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs)
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION This cable turns the 4-pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontrolle...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Grove Base Shield for Arduino V2
Seeed Studio£5.99 inc VAT
£4.99 ex VATDESCRIPTION This is the Grove base shield as seen in the Grove starter kits for Arduino. It lets you connect Grove components easily to your Arduin...
View full details£5.99 inc VAT
£4.99 ex VATSold out -
Grove - Universal 4 Pin Buckled 50cm Cable (5 PCs Pack)
Seeed Studio£3.99 inc VAT
£3.33 ex VATDESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...
View full details£3.99 inc VAT
£3.33 ex VATSold out -
Grove - I2C Hub
Seeed Studio£2.99 inc VAT
£2.49 ex VATDESCRIPTION I2C Hub Grove is an extension Grove module for connecting multiple I2C devices to Grove Base Shield. It can use with Universal 4 Pin X2...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Grove - Relay
Seeed Studio£2.99 inc VAT
£2.49 ex VATDESCRIPTION The Grove relay is capable of switching much higher voltages and currents than your normal Arduino boards. When set to HIGH, the LED wi...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Qwiic To Grove Cable (SPX-14739)
SparkFun£1.78 inc VAT
£1.48 ex VATDESCRIPTION The SparkFun Qwiic system is expanding greatly. But we understand there are other systems out there. The Qwiic to Grove cable allows in...
View full details£1.78 inc VAT
£1.48 ex VATSale -
Grove - Universal 4 pin connectors (10 pcs)
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION Grove - Universal 4 Pin connectors are the white 4-pin buckled connectors used on Stem, Twigs and the Grove cables, with a pin spacing ...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Universal 4 Pin Buckled 20cm Cable (5 PCs Pack)
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Grove - Ultrasonic Ranger Range Finder
Seeed StudioOriginal Price £4.00 inc VATCurrent Price £2.83 inc VAT
£2.36 ex VATDESCRIPTION This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It's designed for ...
View full detailsOriginal Price £4.00 inc VATCurrent Price £2.83 inc VAT
£2.36 ex VATSave 29% -
Grove - Temperature & Humidity Sensor (DHT11)
Seeed Studio£4.00 inc VAT
£3.33 ex VATDESCRIPTION This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative h...
View full details£4.00 inc VAT
£3.33 ex VATSold out -
Grove - LED
Seeed Studiofrom £1.34 inc VATDESCRIPTION This is a general purpose LED module in Grove form factor, available in different colours. The ingenious PCB design enables you to ben...
View full detailsfrom £1.34 inc VATSale -
Grove - Universal 4 pin connectors 90°(10 pcs)
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION Grove - Universal 4 Pin connector 90° are white 4-pin buckled connectors which can be used with Stem, Twigs and the Grove cables. The p...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Grove & Qwiic/STEMMA QT Interface to Male/Female Jumper Cables
Seeed Studio£2.62 inc VAT
£2.18 ex VATDESCRIPTION Do you want to connect multiple Grove, Qwiic, and STEMMA QT modules to your development boards using a single cable? It's easy with the...
View full details£2.62 inc VAT
£2.18 ex VATSale -
OBD-II CAN-BUS Development Kit
Seeed Studio£25.99 inc VAT
£21.66 ex VATDESCRIPTION This kit allows you to interface with your vehicle's OBD-II interface. The kit includes a Serial CAN-BUS module as well as an OBD-II Co...
View full details£25.99 inc VAT
£21.66 ex VATSold out -
Grove - Servo
Seeed Studio£6.99 inc VAT
£5.83 ex VATDESCRIPTION Grove - Servo is a bonus product for Grove lovers. They have regulated the three-wire servo into a Grove standard connector. Now you ca...
View full details£6.99 inc VAT
£5.83 ex VATSold out -
Grove - Screw Terminal
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION The Grove - Screw Terminal comes with four 3.5mm pitch pins rated up to 6A. The Terminal can accept 30 to 20AWG wire. It is a commonly ...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Universal 4 Pin Buckled 5cm Cable (5 PCs Pack)
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Grove - Moisture Sensor
Seeed StudioOriginal Price £2.99 inc VATCurrent Price £2.06 inc VAT
£1.72 ex VATDESCRIPTION The Grove Moisture Sensor can be used to detect the moisture of soil and to judge if there is dampness around the sensor. It can be use...
View full detailsOriginal Price £2.99 inc VATCurrent Price £2.06 inc VAT
£1.72 ex VATSave 31% -
Grove - Light Sensor v1.2
Seeed Studio£2.99 inc VAT
£2.49 ex VATDESCRIPTION The Grove Light Sensor v1.2 is aimed at measuring light levels, however with higher reliability and sensibility. It is an analogue modu...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Grove Bundle Starter Kit for Arduino + Arduino Uno R3
Cool Components£66.85 inc VAT
£55.71 ex VATDESCRIPTION This Grove bundle starter kit comes with an Arduino Uno development board included for you to get up and running with your projects. Th...
View full details£66.85 inc VAT
£55.71 ex VATSold out -
Grove Shield for Arduino Nano
Seeed Studio£4.00 inc VAT
£3.33 ex VATDESCRIPTION As the name suggests this shield is made for the Arduino Nano, but it also can be used with a Seeeduino Nano. This shield pulls out the...
View full details£4.00 inc VAT
£3.33 ex VATSold out -
Grove - Breadboard
Seeed StudioOriginal Price £4.00 inc VATCurrent Price £2.46 inc VAT
£2.05 ex VATDESCRIPTION This module is the combination of a breadboard and Grove PCB board. For the very first time, you can build your very own Grove module, ...
View full detailsOriginal Price £4.00 inc VATCurrent Price £2.46 inc VAT
£2.05 ex VATSave 39% -
Grove Shield for Pi Pico v1.0
Seeed Studio£4.99 inc VAT
£4.16 ex VATDESCRIPTION The Grove Shield for Pi Pico v1.0 is a plug-and-play shield for Raspberry Pi Pico which integrates with various kinds of Grove connecto...
View full details£4.99 inc VAT
£4.16 ex VATSold out -
Grove - Loudness Sensor
Seeed StudioOriginal Price £5.99 inc VATCurrent Price £4.01 inc VAT
£3.34 ex VATDESCRIPTION The Grove-Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphon...
View full detailsOriginal Price £5.99 inc VATCurrent Price £4.01 inc VAT
£3.34 ex VATSave 33%