TCA9548A I2C Multiplexer (ID: 2717)

Adafruit  |  SKU: 1769
£7.49
Tax included, shipping and discounts calculated at checkout.

TCA9548A I2C Multiplexer (ID: 2717) is backordered and will ship as soon as it is back in stock.


DESCRIPTION

You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address, and from what I know about I2C, you cannot have two devices with the same address on the same SDA/SCL pins!" Are you out of luck? You would be if you didn't have this ultra-cool TCA9548A 1-to-8 I2C multiplexer!

Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set of I2C pins with your command.

Using the TCA9548A I2C Multiplexer is fairly straight-forward: the multiplexer itself is on I2C address 0x70 (but can be adjusted from 0x70 to 0x77) and you simply write a single byte with the desired multiplexed output number to that port, and bam - any future I2C packets will get sent to that port. In theory, you could have 8 of these multiplexers on each of 0x70-0x77 addresses in order to control 64 of the same-I2C-addressed-part.

For easy use on a breadboard with capacitors, and pullups and pulldowns some headers are required, once soldered in you can plug it into a solderless breadboard. The chip itself is 3V and 5V compliant so you can use it with any logic level.

FEATURES

 

  • Selectable I2C address 0x70-0x77
  • Weight: 1.8g
  • Product Dimensions: 30.6mm x 17.6mm x 2.7mm / 1.2" x 0.7" x 0.1"
RESOURCES

Adafruit TCA9548A 1-to-8 I2C Multiplexer Breakout Guide

Tca9548A I2C Multiplexer (Id: 2717) - Active Components
Adafruit

TCA9548A I2C Multiplexer (ID: 2717)

£7.49
DESCRIPTION

You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address, and from what I know about I2C, you cannot have two devices with the same address on the same SDA/SCL pins!" Are you out of luck? You would be if you didn't have this ultra-cool TCA9548A 1-to-8 I2C multiplexer!

Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set of I2C pins with your command.

Using the TCA9548A I2C Multiplexer is fairly straight-forward: the multiplexer itself is on I2C address 0x70 (but can be adjusted from 0x70 to 0x77) and you simply write a single byte with the desired multiplexed output number to that port, and bam - any future I2C packets will get sent to that port. In theory, you could have 8 of these multiplexers on each of 0x70-0x77 addresses in order to control 64 of the same-I2C-addressed-part.

For easy use on a breadboard with capacitors, and pullups and pulldowns some headers are required, once soldered in you can plug it into a solderless breadboard. The chip itself is 3V and 5V compliant so you can use it with any logic level.

FEATURES

 

RESOURCES

Adafruit TCA9548A 1-to-8 I2C Multiplexer Breakout Guide

View product