Adafruit Products

DESCRIPTION This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, i...

DESCRIPTION This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using Fea...

DESCRIPTION An exotic new microphone has arrived, a PDM MEMS Microphone! PDM is the 'third' kind of microphone you can integrate with electronics, ...

DESCRIPTION Wouldn't it be cool to drive a tiny OLED display, read a colour sensor, or even just flash some LEDs directly from your computer?  Sure...

DESCRIPTION Inside the RP2040 is a 'permanent ROM' USB UF2 bootloader. What that means is when you want to program new firmware, you can hold down ...

DESCRIPTION Want to add something new and futuristic to your next project, or a way to quickly break or make contacts? you can now experiment with ...

DESCRIPTION This DPS310 sensor is a high precision barometric sensor, perfect for measuring altitude changes with up to ±0.002 hPa (or ±0.02 m) in ...

DESCRIPTION FRAM, or Ferroelectric Ram, is the coolest new data storage method that all fashion magazines are talking about. Oh, wait, no that's qu...

DESCRIPTION Say hello to the 1.14" 240x135 Color TFT Display w/ MicroSD Card Breakout. It's the size of your thumbnail, with glorious 240x135 high ...

DESCRIPTION Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature and barometric pressure that is ...

DESCRIPTION The PiTFT Plus capacitive touchscreen display for the Raspberry Pi features a 2.8" display with 320x240 16-bit colour pixels and a cap...

DESCRIPTION Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion ...

DESCRIPTION The Adafruit AS7341 10-Channel Light / Colour Sensor Breakout is a multi-channel spectrometer, which is a special type of light sensor ...

DESCRIPTION Make your very own programmable NeoPixel goggles with 2 x 16 LED rings and an Adafruit Trinket. It even comes with a rechargeable LiPol...

DESCRIPTION Low cost Lithium Polymer batteries have revolutionized electronics - they're thin, they're light, they can be regulated down to 3.3V an...

DESCRIPTION This is the BH1750 16-bit Ambient Light Sensor from Rohm. Because of how important it is to humans and most other living things, sensin...

DESCRIPTION This miniature GPS breakout is only 1" x 1" (~ 25mm x 25mm) but houses a complete GPS/GNSS solution with both I2C and UART interfaces. ...

DESCRIPTION Measure the invisible magnetic fields that surround us, with this wide-range magnetometer. The MLX90393 is a wide range magnetic field ...

DESCRIPTION Detect trees of green, and red roses too with the new Adafruit AS7262 6-Channel Visible Light / Colour Sensor Breakout. This sensor fro...

DESCRIPTION Learn electronics with the Circuit Playground, a great way to practice programming on real hardware. It has built in sensors and LEDs a...

DESCRIPTION What's better than a single LED? Lots of LEDs! A fun way to make a small colourful display is to use a 1.2" Bi-colour 8x8 LED Matrix. M...

DESCRIPTION Turn up that Raspberry Pi mix to the max with this 3W Stereo Amplifier Bonnet for Raspberry Pi. It's the exact same size as a Raspberry...

DESCRIPTION The Bluefruit LE Friend USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standa...

DESCRIPTION The ESP32-S3 has arrived in Feather format and is a fantastic way to get started with this powerful new chip from Espressif! Make power...

DESCRIPTION We sure love the ATmega328 and so do Adafruit, we use them a lot for our own projects. The processor has plenty of GPIO, Analogue input...

DESCRIPTION Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a smal...

DESCRIPTION Secure your project with biometrics - this adorably tiny, all-in-one, optical fingerprint sensor will make adding fingerprint detectio...

DESCRIPTION The LIS3DH is a very popular low-power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an acce...

DESCRIPTION This rotary-potentiometer knob has a nice soft-touch feel with an arrow on it, and its much 'slimmer' than other skirted knobs, so good...

DESCRIPTION Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some tha...

DESCRIPTION Behold, the ST LSM6DSOX: The latest in a long line of quality Accelerometer + Gyroscope 6-DOF IMUs from ST. This IMU sensor has 6 degre...

DESCRIPTION This unbelievably small USB camera is great for embedded projects that have USB host support for standard UVC cameras, and not a lot of...

DESCRIPTION What has your favourite Espressif WiFi microcontroller, comes with the STEMMA QT connector, a chainable I2C port, and has lots of Flash...

DESCRIPTION Keep wet things wet and dry things dry by detecting when the dry things get wet by accident! This palm-sized cherry-red water sensor is...

DESCRIPTION If you're looking for the most compact display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you nee...

DESCRIPTION The Adafruit HUZZAH32 ESP32 is one of the most popular feathers and has now been given an upgrade! One of the biggest changes is the c...

DESCRIPTION This is an ESP32-S2 Feather board with a built-in IPS TFT colour display. It's got all the features of a Feather mainboard, the comfort...

DESCRIPTION This cable has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it will gi...

DESCRIPTION Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. They ar...