Products

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...

DESCRIPTION These are 155mm long jumpers terminated as male to female. Use these to jumpers from any male or female header on any board. Multiple j...

DESCRIPTION These are 100mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other fe...

DESCRIPTION Once you've hacked everything, why not go out into the garage and hack your car? This cable allows you to access the pins on your car'...

DESCRIPTION This is the official 2.5Amp 5.1V power supply for Raspberry Pi 3 model B/B+. The latest version of the Raspberry Pi cannot be powered ...

DESCRIPTION It's time to effectively manage the power distribution into your project and with the SparkFun Power Delivery Board, you can! Traditio...

DESCRIPTION This is a CE marked UK plug 12V 3000mA (AA) DC power supply. Compatible with electronic projects/components with a 2.1mm x 5.5mm center...

DESCRIPTION This is a UK mains plug to IEC 60320 C13 connector with a 2 meter lead, often referred to as a Kettle or PC connector that's rated for ...

DESCRIPTION  This is a 1m UK mains plug to IEC 60320 C7 connector often referred to as a 'figure-8' connector. It's rated for up to 3A at 240VAC. F...

DESCRIPTION This is a 100mm long 4-conductor cable with a 1mm JST termination. It's designed to connect Qwiic enabled components together but can b...

DESCRIPTION This is a 50mm long 4-conductor cable with a 1mm JST termination. It’s designed to connect Qwiic enabled components together but ...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail o...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the othe...

DESCRIPTION The SparkFun Qwiic system is expanding greatly. But we understand there are other systems out there. The Qwiic to Grove cable allows in...

DESCRIPTION The new 27W USB-C PD (Power Delivery) Power Supply will deliver a maximum of 5.1V, 5A enabling the Raspberry Pi 5 to power a wider rang...

DESCRIPTION The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use...

DESCRIPTION The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use...

DESCRIPTION The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi ...

DESCRIPTION Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a p...

DESCRIPTION This 12-inch (30cm), flat servo extension cable has 22-AWG wires and female "JR"-style connectors on both ends, the same kind of connec...

DESCRIPTION Stretch out your servo connections with this flexible servo to alligator clip cable. It has a 3-pin shrouded "male" connection to plug...

DESCRIPTION This MicroSD card adaptor allows you to easily use gigabytes of flash memory with the Teensy. It can also be used on a breadboard, or w...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Base Shield or to other Twig compatib...

DESCRIPTION More and more devices use the USB type C interface, so we recommend this high-speed, cost-effective USB type C to A cable. It supports ...

DESCRIPTION This is a USB 2.0 type A to mini B 5-pin cable. It is 1.8 metres in length and uses quality 28AWG wire, which is thicker than lower qua...

DESCRIPTION Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART’s mysterious baud rate? Or do you want to reverse engine...

DESCRIPTION This cable has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it will gi...