Products

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...

DESCRIPTION The LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarka...

DESCRIPTION This simple breakout board makes it easy to use our LED tactile switches on a breadboard, or on your next project. Please Note: Popula...

DESCRIPTION This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB ...

DESCRIPTION This is an RJ45 Ethernet / LAN socket with Green and Yellow status LEDs and built-in magnetics. Essential for getting your micros talk...

DESCRIPTION The Mayku FormBox makes molds in seconds, speeding up your product development cycle. Bringing your next idea to life has never been e...

DESCRIPTION Translucent, milky-coloured sheets made of low-density polyethylene. Designed specifically for making custom molds for casting resin. T...

DESCRIPTION Transparent and food-safe 0.5mm sheets for making reusable molds. The slight flex and non-stick surface that the sheet provides ensures...

DESCRIPTION A 0.5mm versatile, easy-to-use white sheet. Great for product packaging, prototyping and enhancing decorative craft projects. Fully re...

DESCRIPTION The mega shield header kit provides you with the correct sized stackable female headers to fit with most Arduino Mega shield projects. ...

DESCRIPTION This is a micro USB connector designed for surface mount connections. Perfect if you've managed to damage/rip off a micro USB connecto...

DESCRIPTION Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. To use with an Arduino, connect ...

DESCRIPTION Connect to nearly any kind of FPC/flex cable with the 40-pin FPC to breadboard adapter plate. You get 40 pads of 0.5mm, 0.6mm, 0.7mm, 0...

DESCRIPTION The Proto Expansion for the Onion Omega allows you to create your very own Expansion that interfaces with your Omega. It provides a sma...

DESCRIPTION This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high...

DESCRIPTION This PCB Fab-in-a-box sampler pack has 4 different types of PCB laminate for DIY printed circuit board fabrication. The pack is great f...

DESCRIPTION GreenTRF is used to seal the toner "circuit image" after it has been transferred to the circuit board. Toner is a very porous material....

DESCRIPTIONThis proto-board is the PCB you always wish you had, but never realized it! Adafruit took the basic layout of a half-sized breadboard an...

DESCRIPTIONThis proto-board is the PCB you always wish you had, but never realized it! Adafruit took the basic layout of a quarter-sized breadboard...

DESCRIPTION This is a 16GB class 10 microSD card that comes with a pre-installed with NOOBS operating system and an adapter for an SD card slot. Th...

DESCRIPTION This is a 100mm long 4-conductor cable with a 1mm JST termination. It's designed to connect Qwiic enabled components together but can b...

DESCRIPTION This is a 50mm long 4-conductor cable with a 1mm JST termination. It’s designed to connect Qwiic enabled components together but ...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail o...

DESCRIPTION Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your ow...

DESCRIPTION The Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-base...

DESCRIPTION This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 3 so you can easily connect via ribbon cable to ...

DESCRIPTION The Cool Components Resistor Kit contains over 400 0.25W resistors in a range of different values all packed in a reusable component bo...

DESCRIPTION This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" head...

DESCRIPTION The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the h...

DESCRIPTION This medium sized, high-quality breadboard is great for prototyping and testing circuits. It has 3 colour coded screw terminals located...

DESCRIPTION This large, high-quality breadboard is great for prototyping and testing circuits. It has 4 colour coded screw terminals located at the...

DESCRIPTION This large, high-quality breadboard is great for prototyping and testing circuits. It has 4 colour coded screw terminals located at the...