Currently On Sale

DESCRIPTION This is the RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The on...

DESCRIPTION This is a low-cost, basic SOIC breakout board. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are eas...

DESCRIPTION This is a breakout board for the very handy 16-Channel Analogue/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rota...

DESCRIPTION Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcon...

DESCRIPTION The XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to the Qwiic Connect System. Equipped with the XA...

DESCRIPTION This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes. Audio Amplifier-...

DESCRIPTION The Sensor:bit is a breakout board for the BBC micro:bit. It has extended all available IO ports on the micro:bit, and lead them out i...

DESCRIPTION The Basic:bit is a basic breakout board for the micro:bit. It has a buzzer and three groups of GVS pins(P0/P1/P2) on the board. Each gr...

DESCRIPTION Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in ...

DESCRIPTION Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in ...

DESCRIPTION Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNEC...

DESCRIPTION The I2C Encoder V2 is a small board where you can use a classical mechanical encoder or an illuminated RGB encoder on the I2C bus. The ...

DESCRIPTION The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting in...

DESCRIPTION The Terminal Breakout board for the BBC micro:bit does exactly what it says on the tin. It breaks out all of the signal and power pins ...

DESCRIPTION The easiest way to use breakouts with your Raspberry Pi, is there's no soldering required, just pop up to three Pimoroni breakouts int...

DESCRIPTION Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, ju...

DESCRIPTION Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, jus...

DESCRIPTION Help yourself by making your life easier with the Servo Six board, designed to simplify the process of connecting up to six servo motor...

DESCRIPTION An H-bridge DC motor driver with a configurable current limit (0.2 or 1A) and up to four different I2C addresses, making it great for D...

DESCRIPTION Now with SPI! The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni br...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring...

DESCRIPTION The SparkFun Qwiic Clock Generator Breakout offers a wide range of customizable frequencies in a wide range of different signal types u...

DESCRIPTION This is a simple breakout board for the MQ - 3, MQ - 4, MQ - 6, MQ - 7, and MQ - 8 gas sensors. With the Gas Sensor Breakout, you will ...

DESCRIPTION The Monk Makes GPIO Adaptor for Pi 400 makes it easy to use existing Raspberry Pi accessories with the new Raspberry Pi 400. It also ma...

DESCRIPTION The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development pla...

DESCRIPTION This control board is designed to make using NeoPixel and DotStar LED strips and rings as easy as possible with a Teensy microcontrolle...

DESCRIPTION This one's going out to all the makers and designers who love using terminal blocks for wiring up their projects. This adapter plate is...

DESCRIPTION An easy, solderless, swappable way to use breakouts with your Raspberry Pi Pico - add up to six Pimoroni breakouts (4 x I2C and 2 x SPI...

DESCRIPTION What better way to make your next arcade cabinet stand out from the crowd than using up to four glowing LED Arcade Buttons! The Adafru...

DESCRIPTION The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperatu...

DESCRIPTION The SparkFun STTS22H Micro Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital tem...

DESCRIPTION This breakout board is a "three in one" product: The ATtiny816 is part of the 'next gen' of AVR microcontrollers, and now we have a cu...

DESCRIPTION The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage r...

DESCRIPTION Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell CAN Bus is in stock and ready to ass...

DESCRIPTION The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit Neo...