New Products

DESCRIPTION This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with offi...

DESCRIPTION This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standar...

DESCRIPTION Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock ...

DESCRIPTION Standard 22 AWG solid Red hook-up wire. Use this with your breadboard or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTION These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of gr...

DESCRIPTION These 2x3 crimp connectors can be snapped onto a 6-wire ribbon cable to make your own cable assemblies and keep your connections organ...

DESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the ...

DESCRIPTION This is a high-quality solderless prototyping breadboard. Each row/column has a letter or a number, and there are two double rail power...

DESCRIPTION This is a high-quality, easy to use 28-pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high...

DESCRIPTION This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and high c...

DESCRIPTION The Cool Components Resistor Kit contains over 400 0.25W resistors in a range of different values all packed in a reusable component bo...

DESCRIPTION With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to break...

DESCRIPTIONThis is a 40 x 3 right angle pin header. The individual sections are segmented, so it's easy to cut them to match your requirements. 0.1...

DESCRIPTION This is an RJ45 Ethernet / LAN socket with Green and Yellow status LEDs and built-in magnetics. Essential for getting your micros talk...

DESCRIPTION This is a 20-pin female header with extra long legs (10.5mm) - The legs are long enough to poke through a PCB and mate with another con...

DESCRIPTION The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the h...

DESCRIPTION Standard 22 AWG solid core black wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTION This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". RESOURCES Datash...

DESCRIPTION This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". RESOURCES Datasheet

DESCRIPTION GreenTRF is used to seal the toner "circuit image" after it has been transferred to the circuit board. Toner is a very porous material....

DESCRIPTION This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are sold...