Filters
New Products
-
Cold Splice Wire Tap (UB) - Wire-tap Splice
Generic / OEMOriginal Price £0.22 inc VATCurrent Price £0.05 inc VAT
£0.04 ex VATDESCRIPTION Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able ...
View full detailsOriginal Price £0.22 inc VATCurrent Price £0.05 inc VAT
£0.04 ex VATSave 77% -
Cold 2-Wire Splice (UY) - Two-way Butt Splice
Generic / OEMOriginal Price £0.20 inc VATCurrent Price £0.05 inc VAT
£0.04 ex VATDESCRIPTION Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able ...
View full detailsOriginal Price £0.20 inc VATCurrent Price £0.05 inc VAT
£0.04 ex VATSave 75% -
Cold 3-Wire Splice (UR) - Three-way Butt Splice
Generic / OEM£2.17 inc VAT
£1.81 ex VATDESCRIPTION Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able ...
View full details£2.17 inc VAT
£1.81 ex VATSale -
10 Pin Female Header
Generic / OEMOriginal Price £0.47 inc VATCurrent Price £0.08 inc VAT
£0.07 ex VATDESCRIPTION This is a 10-pin, 0.1" spaced, female header, the same kind as the 10-pin header on the Arduino Yun. FEATURES 8.5mm high (excluding p...
View full detailsOriginal Price £0.47 inc VATCurrent Price £0.08 inc VAT
£0.07 ex VATSave 83% -
Rotary Encoder Breakout - Illuminated (RG/RGB) (BOB-11722)
SparkFun£3.36 inc VAT
£2.80 ex VATDESCRIPTION This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB ...
View full details£3.36 inc VAT
£2.80 ex VATSale -
SOIC to DIP Adapter 20-Pin (BOB-00495)
SparkFunOriginal Price £2.04 inc VATCurrent Price £1.60 inc VAT
£1.33 ex VATDESCRIPTION This is a low-cost, basic SOIC breakout board. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are eas...
View full detailsOriginal Price £2.04 inc VATCurrent Price £1.60 inc VAT
£1.33 ex VATSave 22% -
Clear Plastic Knob
Duppa£0.79 inc VAT
£0.66 ex VATDESCRIPTION This plastic knob accepts a 6mm shaft. They simple press-fit onto a shaft. These are clear so that they can be used with the illuminate...
View full details£0.79 inc VAT
£0.66 ex VATSale -
Jumper Wire Ribbon Cable - Male to Female
Generic / OEMOriginal Price £2.99 inc VATCurrent Price £0.55 inc VAT
£0.46 ex VATDESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...
View full detailsOriginal Price £2.99 inc VATCurrent Price £0.55 inc VAT
£0.46 ex VATSold out -
Jumper Wire Ribbon Cable - Female to Female
Generic / OEMOriginal Price £2.99 inc VATCurrent Price £0.55 inc VAT
£0.46 ex VATDESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...
View full detailsOriginal Price £2.99 inc VATCurrent Price £0.55 inc VAT
£0.46 ex VATSave 82% -
Jumper Wire Ribbon Cable - Male to Male
Generic / OEM£2.99 inc VAT
£2.49 ex VATDESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, crisscrossing over each other and the longer you stare at...
View full details£2.99 inc VAT
£2.49 ex VATSale -
Opto-isolator Breakout (BOB-09118)
SparkFun£5.34 inc VAT
£4.45 ex VATDESCRIPTION This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high...
View full details£5.34 inc VAT
£4.45 ex VATSale -
Ribbon Crimp Connector - Breadboard Friendly (2x5, Female)
Generic / OEMOriginal Price £0.71 inc VATCurrent Price £0.54 inc VAT
£0.45 ex VATDESCRIPTION This 2x5 crimp connector snaps onto a 10-pin ribbon cable to form a dual-inline connection that can be pushed right into a breadboard....
View full detailsOriginal Price £0.71 inc VATCurrent Price £0.54 inc VAT
£0.45 ex VATSave 24% -
Male to Male Jumper Wire Variety Pack
Generic / OEMOriginal Price £3.59 inc VATCurrent Price £1.31 inc VAT
£1.09 ex VATDESCRIPTION This is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike other jumper wires the pla...
View full detailsOriginal Price £3.59 inc VATCurrent Price £1.31 inc VAT
£1.09 ex VATSave 64% -
Breadboard Mini (Linkable, Blue)
Generic / OEM£1.44 inc VAT
£1.20 ex VATDESCRIPTION These small, handy breadboards are big enough for most simple jobs and make development work much easier and faster. They can also be l...
View full details£1.44 inc VAT
£1.20 ex VATSold out -
5V Step-Up/Step-Down Voltage Regulator S7V8F5
Pololu£11.81 inc VAT
£9.84 ex VATDESCRIPTION The Pololu step-up/step-down voltage regulator S7V8F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-t...
View full details£11.81 inc VAT
£9.84 ex VATSale -
Si4703 FM Tuner Basic Breakout (BOB-11083)
SparkFun£12.32 inc VAT
£10.27 ex VATDESCRIPTION This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If y...
View full details£12.32 inc VAT
£10.27 ex VATSale -
Grove 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs)
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION This cable turns the 4-pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontrolle...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Female Header - 40 Pin
Generic / OEMOriginal Price £1.19 inc VATCurrent Price £0.30 inc VAT
£0.25 ex VATDESCRIPTION A single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively ...
View full detailsOriginal Price £1.19 inc VATCurrent Price £0.30 inc VAT
£0.25 ex VATSave 75% -
MicroSD Breakout (ID: 254)
Adafruit£7.99 inc VAT
£6.66 ex VATDESCRIPTION Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. To use with an Arduino, connect ...
View full details£7.99 inc VAT
£6.66 ex VATSale -
JST PH Plug Housing 5 pin
Generic / OEMOriginal Price £0.06 inc VATCurrent Price £0.02 inc VAT
£0.02 ex VATDESCRIPTION This is a 5-pin JST plug housing. They're type PH (the smaller type) and do require additional parts to turn them into a complete plug/...
View full detailsOriginal Price £0.06 inc VATCurrent Price £0.02 inc VAT
£0.02 ex VATSave 67% -
JST PH Plug Housing 4 pin
Generic / OEMOriginal Price £0.06 inc VATCurrent Price £0.02 inc VAT
£0.02 ex VATDESCRIPTION This is 4-pin JST plug housing. They're type PH (the smaller type) and do require additional parts to turn them into a complete plug/co...
View full detailsOriginal Price £0.06 inc VATCurrent Price £0.02 inc VAT
£0.02 ex VATSave 67% -
JST PH Plug Housing 3 pin
Generic / OEMOriginal Price £0.05 inc VATCurrent Price £0.02 inc VAT
£0.02 ex VATDESCRIPTION This is a 3-pin JST plug housing. They're type PH (the smaller type) and do require additional parts to turn them into a complete plug/...
View full detailsOriginal Price £0.05 inc VATCurrent Price £0.02 inc VAT
£0.02 ex VATSave 60% -
FTDI Basic Breakout - 5V (DEV-09716)
SparkFun£13.91 inc VAT
£11.59 ex VATDESCRIPTION This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with offi...
View full details£13.91 inc VAT
£11.59 ex VATSale -
Breakout Board for XBee Module (BOB-08276)
SparkFun£2.04 inc VAT
£1.70 ex VATDESCRIPTION This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standar...
View full details£2.04 inc VAT
£1.70 ex VATSale