Filters
Prototyping Breakout Boards
-
FTDI Basic Breakout - 5V (DEV-09716)
SparkFun£13.91 inc VAT
£11.59 ex VATDESCRIPTION This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with offi...
View full details£13.91 inc VAT
£11.59 ex VATSale -
USB Micro B Socket Breakout Board (BOB-12035)
SparkFun£2.69 inc VAT
£2.24 ex VATDESCRIPTION This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the pop...
View full details£2.69 inc VAT
£2.24 ex VATSale -
RFID Reader Breakout (SEN-13030)
SparkFun£2.17 inc VAT
£1.81 ex VATDESCRIPTION This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" head...
View full details£2.17 inc VAT
£1.81 ex VATSale -
Analog/Digital MUX Breakout (BOB-09056)
SparkFunOriginal Price £5.87 inc VATCurrent Price £4.57 inc VAT
£3.81 ex VATDESCRIPTION This is a breakout board for the very handy 16-Channel Analogue/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rota...
View full detailsOriginal Price £5.87 inc VATCurrent Price £4.57 inc VAT
£3.81 ex VATSave 22% -
Rotary Encoder Breakout - Illuminated (RG/RGB) (BOB-11722)
SparkFun£3.36 inc VAT
£2.80 ex VATDESCRIPTION This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB ...
View full details£3.36 inc VAT
£2.80 ex VATSale -
Serial Basic Breakout - CH340G (DEV-14050)
SparkFun£8.59 inc VAT
£7.16 ex VATDESCRIPTION The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V ...
View full details£8.59 inc VAT
£7.16 ex VATSale -
SI5351A Clock Generator Breakout Board - 8KHz TO 160MHz (ID: 2045)
Adafruit£8.99 inc VAT
£7.49 ex VATDESCRIPTION The Si5351A clock generator breakout from Adafruit allows you to generate any clock frequency from 8Khz up to 160MHz. The clock generat...
View full details£8.99 inc VAT
£7.49 ex VATSale -
Opto-isolator Breakout (BOB-09118)
SparkFun£5.34 inc VAT
£4.45 ex VATDESCRIPTION This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high...
View full details£5.34 inc VAT
£4.45 ex VATSale -
MicroSD Breakout (ID: 254)
Adafruit£7.99 inc VAT
£6.66 ex VATDESCRIPTION Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. To use with an Arduino, connect ...
View full details£7.99 inc VAT
£6.66 ex VATSale -
I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte (ID: 1895)
Adafruit£10.79 inc VAT
£8.99 ex VATDESCRIPTION FRAM, or Ferroelectric Ram, is the coolest new data storage method that all fashion magazines are talking about. Oh, wait, no that's qu...
View full details£10.79 inc VAT
£8.99 ex VATSale -
SOIC to DIP Adapter - 8-Pin (BOB-13655)
SparkFun£3.36 inc VAT
£2.80 ex VATDESCRIPTION The 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for ...
View full details£3.36 inc VAT
£2.80 ex VATSale -
Breakout Board for MCP4725 I2C DAC (BOB-12918)
SparkFun£5.08 inc VAT
£4.23 ex VATDESCRIPTION You've always wanted to output analogue voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 i...
View full details£5.08 inc VAT
£4.23 ex VATSale -
Breakout Board for XBee Module (BOB-08276)
SparkFun£2.04 inc VAT
£1.70 ex VATDESCRIPTION This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standar...
View full details£2.04 inc VAT
£1.70 ex VATSale -
16 Output I/O Expander Breakout - SX1509 (BOB-13601)
SparkFun£6.48 inc VAT
£5.40 ex VATDESCRIPTION The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface that means with just two wires, your microcontroller can inter...
View full details£6.48 inc VAT
£5.40 ex VATSale -
SOT23 to DIP Adapter (BOB-00717)
SparkFun£0.59 inc VAT
£0.49 ex VATDESCRIPTION 6-pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Volta...
View full details£0.59 inc VAT
£0.49 ex VATSold out -
Breakout Board for Thumb Joystick (BOB-09110)
SparkFun£1.85 inc VAT
£1.54 ex VATDESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the ...
View full details£1.85 inc VAT
£1.54 ex VATSale -
Breakout Board for SD-MMC Cards (BOB-12941)
SparkFun£8.24 inc VAT
£6.87 ex VATDESCRIPTION With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to break...
View full details£8.24 inc VAT
£6.87 ex VATSale -
ZIF Socket 28-Pin 0.3 inch
Generic / OEM£2.83 inc VAT
£2.36 ex VATDESCRIPTION This is a high-quality, easy to use 28-pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high...
View full details£2.83 inc VAT
£2.36 ex VATSold out -
DeadOn RTC - DS3234 Breakout (BOB-10160)
SparkFun£22.72 inc VAT
£18.93 ex VATDESCRIPTION Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock ...
View full details£22.72 inc VAT
£18.93 ex VATSale -
GPS Breakout - XA1110 (Qwiic) (GPS-14414)
SparkFunOriginal Price £54.79 inc VATCurrent Price £42.62 inc VAT
£35.52 ex VATDESCRIPTION The XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to the Qwiic Connect System. Equipped with the XA...
View full detailsOriginal Price £54.79 inc VATCurrent Price £42.62 inc VAT
£35.52 ex VATSave 22% -
SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte (ID: 1897)
Adafruit£6.55 inc VAT
£5.46 ex VATDESCRIPTION FRAM, or Ferroelectric Ram, is the coolest new data storage method that all fashion magazines are talking about. Oh, wait, no that's qu...
View full details£6.55 inc VAT
£5.46 ex VATSale -
LED Driver Breakout - LP55231 (BOB-13884)
SparkFun£9.29 inc VAT
£7.74 ex VATDESCRIPTION The LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarka...
View full details£9.29 inc VAT
£7.74 ex VATSale -
Button Pad 4x4 - Breakout PCB (COM-08033)
SparkFun£7.91 inc VAT
£6.59 ex VATDESCRIPTION This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are sold...
View full details£7.91 inc VAT
£6.59 ex VATSale -
Si4703 FM Tuner Basic Breakout (BOB-11083)
SparkFun£12.32 inc VAT
£10.27 ex VATDESCRIPTION This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If y...
View full details£12.32 inc VAT
£10.27 ex VATSale -
LED Tactile Button Breakout
Generic / OEM£1.45 inc VAT
£1.21 ex VATDESCRIPTION This simple breakout board makes it easy to use our LED tactile switches on a breadboard, or on your next project. Please Note: Popula...
View full details£1.45 inc VAT
£1.21 ex VATSale -
Energy Harvester - LTC3588 Breakout (BOB-09946)
SparkFun£27.10 inc VAT
£22.58 ex VATDESCRIPTION This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harve...
View full details£27.10 inc VAT
£22.58 ex VATSale -
SOIC to DIP Adapter 20-Pin (BOB-00495)
SparkFunOriginal Price £2.04 inc VATCurrent Price £1.60 inc VAT
£1.33 ex VATDESCRIPTION This is a low-cost, basic SOIC breakout board. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are eas...
View full detailsOriginal Price £2.04 inc VATCurrent Price £1.60 inc VAT
£1.33 ex VATSave 22% -
ATSAMD09 Breakout with seesaw (ID: 3657)
AdafruitOriginal Price £5.99 inc VATCurrent Price £4.07 inc VAT
£3.39 ex VATDESCRIPTION Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcon...
View full detailsOriginal Price £5.99 inc VATCurrent Price £4.07 inc VAT
£3.39 ex VATSave 32% -
LM3671 3.3V Buck Converter Breakout (ID: 2745)
Adafruit£5.99 inc VAT
£4.99 ex VATDESCRIPTION This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB ...
View full details£5.99 inc VAT
£4.99 ex VATSale -
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch (ID: 2219)
Adafruit£32.71 inc VAT
£27.26 ex VATDESCRIPTION This TFP401 HDMI/DVI Decoder to 40-Pin TTL breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB r...
View full details£32.71 inc VAT
£27.26 ex VATSale