Qwiic Connect System

DESCRIPTION The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF52840 – a powerful combination of ARM ...

DESCRIPTION The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem w...

DESCRIPTION It's time to start utilising the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The Sp...

DESCRIPTION The Adafruit AS7341 10-Channel Light / Colour Sensor Breakout is a multi-channel spectrometer, which is a special type of light sensor ...

DESCRIPTION Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED st...

DESCRIPTION This miniature GPS breakout is only 1" x 1" (~ 25mm x 25mm) but houses a complete GPS/GNSS solution with both I2C and UART interfaces. ...

DESCRIPTION This is the BH1750 16-bit Ambient Light Sensor from Rohm. Because of how important it is to humans and most other living things, sensin...

DESCRIPTION The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor....

DESCRIPTION With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means t...

DESCRIPTION With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means t...

DESCRIPTION Different from the Grove system the Qwiic connection system is an I2C interface system createdby Sparkfun. It uses a 4pin JST SH 1.0mm ...

DESCRIPTION The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to the Qwiic Connect System. The Twist t...

DESCRIPTION Are you looking for a small but powerful MCU for your next project? Are you bored of the Arduino Nano? Then the Maker Nano RP2040 might...

DESCRIPTION The ESP32-S3 has arrived in Feather format and is a fantastic way to get started with this powerful new chip from Espressif! Make power...

DESCRIPTION The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside t...

DESCRIPTION It's time to effectively manage the power distribution into your project and with the SparkFun Power Delivery Board, you can! Traditio...

DESCRIPTION The SparkFun Proximity Sensor Breakout is a simple IR presence and ambient light sensor utilising the VCNL4040. This type of sensor is ...

DESCRIPTION The VEML6075 UV Light Sensor Breakout is SparkFun’s latest ultraviolet sensing solution. The VEML6075 implements a simple photodiode to...

DESCRIPTION The LIS3DH is a very popular low-power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an acce...

DESCRIPTION The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Ar...

DESCRIPTION A lot of the time you just need to add more analogue inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide f...

DESCRIPTION Build the articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement, sensor...

DESCRIPTION Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some tha...

DESCRIPTION Behold, the ST LSM6DSOX: The latest in a long line of quality Accelerometer + Gyroscope 6-DOF IMUs from ST. This IMU sensor has 6 degre...

DESCRIPTION What has your favourite Espressif WiFi microcontroller, comes with the STEMMA QT connector, a chainable I2C port, and has lots of Flash...

DESCRIPTION I²CMini is a USB to I²C bridge. It can drive and monitor I²C traffic and measures just 18 mm square. It has a micro USB connector, a Qw...

DESCRIPTION The SparkFun BME680 Environmental Sensor is a breakout that combines a gas sensor with temperature, humidity and barometric pressure se...

DESCRIPTION The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’...

DESCRIPTION This Real Time Clock (RTC) is the most precise you can get in a small, low-power package. Most RTCs use an external 32kHz timing crysta...

DESCRIPTION We all like to know the temperature, right? Well, with the SparkFun TMP102 Digital Temperature Sensor, we've made it just about as easy...

DESCRIPTION The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with ...

DESCRIPTION The Adafruit VL53L4CX Time of Flight Sensor is another great Time of Flight distance sensor from ST in the VL5 series of chips, design...

DESCRIPTION A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors an...

DESCRIPTION The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as...

DESCRIPTION The Adafruit STEMMA Audio Amp is a super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm i...

DESCRIPTION The SparkFun RFID Qwiic Kit is a simple, yet all-in-one I2C based RFID starting point for the ID-3LA, ID-12LA, and ID-20LA readers. Si...

DESCRIPTION This I2C-friendly user interface element makes it plug-n-play-easy to add a 75mm long slide potentiometer to any microcontroller or mic...

DESCRIPTION The SparkFun Qwiic Micro MMC5983MA Magnetometer is a micro-sized, 0.75in. by 0.30in. sensor that utilizes the highly sensitive triple-a...

DESCRIPTION Do you know which way the wind blows? You will now, with this triple-axis accelerometer/magnetometer compass module. Inside are two sen...

DESCRIPTION For microcontrollers without an analogue-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit prec...