Sparkfun Products

DESCRIPTIONStandard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small s...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the pop...

DESCRIPTION This is an easy-to-assemble pan/tilt bracket kit that utilises servos to move on two axes fit for camera and helping-hand applications....

DESCRIPTION The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out th...

DESCRIPTIONStandard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small sp...

DESCRIPTION This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the P...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform...

DESCRIPTION This 2x20 tall header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the...

DESCRIPTION Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping o...

DESCRIPTION This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need...

DESCRIPTION Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your o...

DESCRIPTION Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common...

DESCRIPTION Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping o...

DESCRIPTION Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically, great for tight spa...