SparkFun

DESCRIPTION This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pres...

DESCRIPTION The Pro Micro 3.3V/8MHz is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to...

DESCRIPTION This is a new Arduino-compatible microcontroller from SFE. The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board...

DESCRIPTION The SparkFun Proximity Sensor Breakout is a simple IR presence and ambient light sensor utilising the VCNL4040. This type of sensor is ...

DESCRIPTION Heart rate data can be really useful whether you're designing an exercise routine, studying your activity or anxiety levels or just wan...

DESCRIPTION A lot of the time you just need to add more analogue inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide f...

DESCRIPTION The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the...

DESCRIPTION This is a 100mm long 4-conductor cable with a 1mm JST termination. It's designed to connect Qwiic enabled components together but can b...

DESCRIPTION This is a 50mm long 4-conductor cable with a 1mm JST termination. It’s designed to connect Qwiic enabled components together but ...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail o...

DESCRIPTION This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the othe...

DESCRIPTION Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your ow...

DESCRIPTION Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmwa...

DESCRIPTION The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturises them, adding...

DESCRIPTION Sometimes you just need an MP3 to play. Whether it’s a theme song as you enter the room or a power song when you are working out. The S...

DESCRIPTION The SparkFun Qwiic OpenLog is the smarter and better looking cousin to the extremely popular OpenLog but now SparkFun has ported the or...

DESCRIPTION The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem w...

DESCRIPTION The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devi...

DESCRIPTION The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the...

DESCRIPTION The Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-base...

DESCRIPTION The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi....

DESCRIPTION The SparkFun Qwiic system is expanding greatly. But we understand there are other systems out there. The Qwiic to Grove cable allows in...

DESCRIPTION The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to the Qwiic Connect System. The Twist t...

DESCRIPTION This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 3 so you can easily connect via ribbon cable to ...

DESCRIPTION This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi...

DESCRIPTION This 2x20 tall header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the...

DESCRIPTION The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi ...

DESCRIPTION This is the Real Time Clock (RTC) Module, this little breakout uses the DS1307 to keep track of the current year, month, day as well ...

DESCRIPTION The SparkFun RedBoard Qwiic is an Arduino-compatible development board that uses a few of the features that they loved about Arduinos o...

DESCRIPTION The SparkFun RFID Qwiic Kit is a simple, yet all-in-one I2C based RFID starting point for the ID-3LA, ID-12LA, and ID-20LA readers. Si...

DESCRIPTION This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" head...

DESCRIPTION The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the h...