SparkFun

DESCRIPTION This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi...

DESCRIPTION This 2x20 tall header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the...

DESCRIPTION The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi ...

DESCRIPTION This is the Real Time Clock (RTC) Module, this little breakout uses the DS1307 to keep track of the current year, month, day as well ...

DESCRIPTION The SparkFun RedBoard Qwiic is an Arduino-compatible development board that uses a few of the features that they loved about Arduinos o...

DESCRIPTION The SparkFun RFID Qwiic Kit is a simple, yet all-in-one I2C based RFID starting point for the ID-3LA, ID-12LA, and ID-20LA readers. Si...

DESCRIPTION This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" head...

DESCRIPTION The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the h...

DESCRIPTION The robot mechanical bumper sensor gives you the ability to detect a collision before it really happens. This sensor works by acting a...

DESCRIPTION This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the chassis ...

DESCRIPTION This is a 12-step rotary encoder with a nice 'clicking' feel. It's breadboard friendly and has a pretty handy select switch (by pushing...

DESCRIPTION Rotary encoders can be used similarly to potentiometers. The difference is that an encoder has full rotation without limits (It just go...

DESCRIPTION This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB ...

DESCRIPTION This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340C and takes advantage of the handy USB-C ...

DESCRIPTION The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V ...

DESCRIPTION The Shadow Chassis is a marvellously durable and modular robot platform. The chassis plates and mounts are cut from ABS plastic and ut...

DESCRIPTION This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If y...

DESCRIPTION The SparkFun Simultaneous RFID reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Freque...

DESCRIPTION This is 12 meters of smooth conductive thread spun from stainless steel fibre and wound on a plastic bobbin. Use it to sew up all of yo...

DESCRIPTION SoftPot membrane potentiometers are very thin variable potentiometers. These are very thin variable potentiometers. By pressing down o...

DESCRIPTION The 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for ...

DESCRIPTION The Soil Moisture Sensor is a simple breakout for measuring the moisture in the soil and similar materials. The soil moisture sensor i...

DESCRIPTION Does controlling door and cabinet access with the power of Electromagnetism interest you? Excellent! In effect, this latch/lock soleno...

DESCRIPTION Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is des...

DESCRIPTION 6-pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Volta...

DESCRIPTION The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provi...