All Products

DESCRIPTION40 way pin header - Extremely useful for making prototyping connections, mounting DIL or SIL components etc. FEATURES Connector Type:W...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTION This is a connector that fits directly to the edge contacts of a BBC Micro-Bit. The connector has 80 pins, but because of the differen...

DESCRIPTIONThis is a 20 pin female header with extra long legs (10.5mm) - The legs are long enough to poke through a pcb and mate with another con...

DESCRIPTIONThis is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike our other jumper wires t...

DESCRIPTIONThis cable turns the 4 pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontroller...

DESCRIPTIONStandard 22 AWG solid core black wire.Use this with your bread board or any project in which you need sturdy wire. Comes in small spools...

DESCRIPTIONStandard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare a...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONSingle row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in ...

DESCRIPTION These are tiny metal pins for the JST SM Male housings that we sell. You will need one pin for every 'hole' that your housing has. Not...

DESCRIPTION The USB Type-C connector is intended to supersede a wide range of existing USB connectors. It is reversible and can serve in both USB ...

DESCRIPTIONStandard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small s...

DESCRIPTION These 10-pin IDC cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming conn...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION These are tiny metal pins for the JST SM Female housings that we sell. You will need one pin for every 'hole' that your housing has. N...

DESCRIPTION This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and hig...

DESCRIPTION This is an easy-to-assemble pan/tilt bracket kit that utilises servos to move on two axes fit for camera and helping-hand applications....

DESCRIPTION This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". Documents: ...

DESCRIPTION These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. ...

DESCRIPTION This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the pop...

DESCRIPTION The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the...

DESCRIPTIONThis is a 40 x 1 right angle pin header. The individual sections are segmented, so it's easy to cut them to match your requirements. 0.1...