All Products

DESCRIPTION If you've ever ordered and wired up a 9-DOF sensor, chances are you've also realised the challenge of turning the sensor data from an ...

DESCRIPTION Talking over an I2C bus, your Arduino, CircuitPython board,  or Python powered computer can talk to the DS3502 and tell it to vary its...

DESCRIPTION Do you want to connect multiple Grove, Qwiic, and STEMMA QT modules to your development boards using a single cable? It's easy with the...

DESCRIPTION The AHT20 is a nice but inexpensive temperature and humidity sensor. You can take sensor readings as often as you like, and it uses st...

DESCRIPTION Different from the Grove system the Qwiic connection system is an I2C interface system createdby Sparkfun. It uses a 4pin JST SH 1.0mm...

DESCRIPTION This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using Fe...

DESCRIPTION The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem ...

DESCRIPTION The MSA301 is a super small and low-cost triple-axis accelerometer. It's inexpensive, but has just about every 'extra' you'd want in a...

DESCRIPTION This is the BH1750 16-bit Ambient Light Sensor from Rohm. Because of how important it is to humans and most other living things, sensi...

DESCRIPTION Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some tha...

DESCRIPTION This Teensy Adapter makes it easier than ever to use Grove and Qwiic compatible products with your favourite Teensy microcontroller. Th...

DESCRIPTION The MS8607 provides factory-calibrated pressure, temperature, and humidity sensor where data is recorded as 16-bit values and made avai...

DESCRIPTION For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JS...

DESCRIPTION Behold, the ST LSM6DSOX: The latest in a long line of quality Accelerometer + Gyroscope 6-DOF IMUs from ST. This IMU sensor has 6 degr...

DESCRIPTION The VCNL4040 is a handy two-in-one sensor, with a proximity sensor that works from 0 to 200mm (about 7.5 inches) and light sensor with...

DESCRIPTION This lovely sensor has ± 3% relative humidity measurements with a range of 0–80% RH, and ±0.4 °C temperature accuracy at a range of -1...

DESCRIPTION The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an acc...

DESCRIPTION This Teensy Adapter makes it easier than ever to use Qwiic compatible products with your favourite Teensy microcontroller. This adapter...

DESCRIPTION For fans of the TMP36, Adafruit now have a very similar analog temperature sensor with a 3-pin JST connector. Unlike many of their temp...

DESCRIPTION This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can reprogram it over I2C. The tag show...

DESCRIPTION Measuring voltage and adjusting it is what electronics is all about so you won’t get far without friends like the Adafruit PCF8591 Qua...

DESCRIPTION Potentiometers are the perfect tool when you want to change your circuit by turning a knob. Turns out, there are times when you want t...

DESCRIPTION Add motion, direction and orientation sensing to your project with this all-in-one 9-DOF sensor that is STEMMA QT ready for easy plug-...

DESCRIPTION The LIS331HH is capable of measuring ±6g/±12g/±24g on each of its three axis! Compare that with most other accelerometers such as the L...