ATSAMD09 Breakout with seesaw (ID: 3657)

Adafruit  |  SKU: 2305
£4.07 £5.99
Tax included, shipping and discounts calculated at checkout.


DESCRIPTION

Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc. The seesaw can be configured to give a wide range of capabilities.

For example, our ATSAMD09 breakout with seesaw gives you

  • 3 x 12-bit ADC inputs
  • 3 x 8-bit PWM outputs
  • 7 x GPIO with selectable pullup or pulldown
  • 1 x NeoPixel output (up to 340 pixels)
  • 1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
  • 1 x Interrupt output that can be triggered by any of the accessories
  • 2 x I2C address selection pins
  • 1 x Activity LED

But you can reprogram and reconfigure the chip to have more or less of each peripheral - as long as it fits into the ATSAMD09D14's firmware! For example, there's also a UART converter but it isn't included in the default firmware.

The ATSAMD09 breakout is great for the development of seesaw capabilities (we use it in-house for our design work) or you can use it as-is to give your Raspberry Pi or ESP8266 more hardware support! Each breakout comes with the assembled and tested board, as well as some header strips.

Please note:

  • The boards do not come with a bootloader.
RESOURCES
  • Documentation on how to use seesaw,
  • Libraries for Arduino/CircuitPython/Raspberry Pi Python, schematics, and more
  • Atsamd09 Breakout With Seesaw (Id: 3657) - Active Components
    Adafruit

    ATSAMD09 Breakout with seesaw (ID: 3657)

    £4.07 £5.99
    DESCRIPTION

    Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc. The seesaw can be configured to give a wide range of capabilities.

    For example, our ATSAMD09 breakout with seesaw gives you

    But you can reprogram and reconfigure the chip to have more or less of each peripheral - as long as it fits into the ATSAMD09D14's firmware! For example, there's also a UART converter but it isn't included in the default firmware.

    The ATSAMD09 breakout is great for the development of seesaw capabilities (we use it in-house for our design work) or you can use it as-is to give your Raspberry Pi or ESP8266 more hardware support! Each breakout comes with the assembled and tested board, as well as some header strips.

    Please note:

    RESOURCES
  • Documentation on how to use seesaw,
  • Libraries for Arduino/CircuitPython/Raspberry Pi Python, schematics, and more
  • View product