Prototyping

DESCRIPTION40 way pin header - Extremely useful for making prototyping connections, mounting DIL or SIL components etc. FEATURES Connector Type:W...

DESCRIPTION This is a connector that fits directly to the edge contacts of a BBC Micro-Bit. The connector has 80 pins, but because of the differen...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONStandard 22 AWG solid core black wire.Use this with your bread board or any project in which you need sturdy wire. Comes in small spools...

DESCRIPTIONThis is a variety pack of 75 male to male 0.1" jumpers of different colours and lengths, from 8-23cm. Unlike our other jumper wires t...

DESCRIPTIONStandard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spoo...

DESCRIPTIONThis is a 20 pin female header with extra long legs (10.5mm) - The legs are long enough to poke through a pcb and mate with another con...

DESCRIPTION So you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare a...

DESCRIPTIONSo you've got a load of jumper wires running from one breadboard to the next, criss crossing over each other and the longer you stare at...

DESCRIPTIONThis cable turns the 4 pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontroller...

DESCRIPTIONSingle row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in ...

DESCRIPTIONStandard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small s...

DESCRIPTION These 10-pin IDC cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming conn...

DESCRIPTION This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and hig...

DESCRIPTIONThis adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, cen...

DESCRIPTION These are tiny metal pins for the JST SM Male housings that we sell. You will need one pin for every 'hole' that your housing has. Not...

DESCRIPTION These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. ...

DESCRIPTION This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". Documents: ...

DESCRIPTIONThis is a 40 x 1 right angle pin header. The individual sections are segmented, so it's easy to cut them to match your requirements. 0.1...

DESCRIPTION This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the pop...

DESCRIPTION These are tiny metal pins for the JST SM Female housings that we sell. You will need one pin for every 'hole' that your housing has. N...

DESCRIPTION These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of g...

DESCRIPTION This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1". FEATURES RESO...

DESCRIPTION This adapter consists of a 9V battery clip and a standard 5.5*2.1mm centre positive barrel jack, it supplies to power any device needi...