Qwiic Connection System Sale

DESCRIPTION We use many Arduinos and we're always looking for the simplest, most stable one. Each board is a bit different and no one board has eve...

DESCRIPTION The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on R...

DESCRIPTION The AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to mea...

DESCRIPTION The AS7262 Visible Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and cha...

DESCRIPTION The XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to the Qwiic Connect System. Equipped with the XA...

DESCRIPTION Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or anot...

DESCRIPTION The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of...

DESCRIPTION Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they're often unrelia...

DESCRIPTION Now, you can easily add an HID/controller to your project! The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection...

DESCRIPTION The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturised, GPS board that is perfect for applications that don't possess a lot...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring...

DESCRIPTION What's better than a single LED? Lots of LEDs! These matrices use a driver chip that does all the heavy lifting for you: They have a bu...

DESCRIPTION Trilobot is designed with education and STEM in mind, this versatile, mid-level robot learning platform for Raspberry Pi is easy to get...

DESCRIPTION The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO,...

DESCRIPTION Is it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of the most powerful microcontroller boa...

DESCRIPTION The BlackBoard from SparkFun is everything you need in an Arduino Uno with many extra perks. BlackBoard has all of the hardware periphe...

DESCRIPTION Most accelerometers have a similar range of measurements that they can make: often around 2G - 16G. Similarly, most gyros can measure i...

DESCRIPTION The Adafruit PCT2075 Temperature Sensor is a 'code compatible' drop-in replacement for a very common I2C temperature sensor, the LM75. ...

DESCRIPTION This breakout board makes it easy to use the tiny MMA8452Q accelerometer to communicate over I2C in your project. The MMA8452Q is a sma...

DESCRIPTION The SparkFun Qwiic Shield for Photon is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System wi...

DESCRIPTION The SCD-40 is a photoacoustic 'true' CO2 sensor that will tell you the CO2 PPM (parts-per-million) composition of ambient air, unlike o...

DESCRIPTION The SparkFun Qwiic ToF Imager is a state of the art, 64-pixel Time-of-Flight (ToF) 4-meter ranging sensor built around the VL53L5CX fro...

DESCRIPTION Add a splash of RGB LEDs to a project you're working on, with this adorable 13x9 RGB LED matrix breakout. It features 117 RGB LEDs, eac...

DESCRIPTION The SparkFun Qwiic Shield for Thing Plus provides an easy-to-assemble way to add the SparkFun Qwiic connect ecosystem to any developme...